WISP Mode:
In WISP mode, the router allows multiple users to share the internet connection from WISP. The LAN port devices share the same IP from the WISP via the wireless port in this manner. When connected to WISP, the wireless port functions as a WAN port.
Common network topology:
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: The Quick Setup window will pop up, choose "WISP", then go "Next".
Step 3: Choose your "Time Zone".
Step 4: Select the host network you want to extend. Click on 'Connect'.
Or click on General Settings->WISP->Enable and then select the host network you want to extend.
Step 5: Enter the host network's wireless password.
Note: Make sure the wireless password you type in is correct, otherwise, the configuration cannot success.
Step 6: Customize the wireless network name and password or keep them default.
Step 7: Click "Save & Apply" to complete the configuration.
Step 8: Wait a few seconds for the system rebooting, when the login page pops up again, you can enjoy the internet.
88 comments
@Dear Franc,
Our technical support has sent you the firmware via email. Please check.
“Hello Cudy Support.
I noticed a few requests in the comments for a beta version of the firmware that supports WISP on WR3600 router. If it’s not too much trouble, could you please send me this version via email? :)
Thank you, and have a nice day.”
Hello Cudy Support.
I noticed a few requests in the comments for a beta version of the firmware that supports WISP on WR3600 router. If it’s not too much trouble, could you please send me this version via email? :)
Thank you, and have a nice day.
Can I get a copy of the beta firmware capable of running either the WR3600 or the WR6500H in WISP mode? I have several of your routers but the inability to run WISP mode has been a major hindrance for my setup. Thank you.
@Dear bula173,
Our technical support has sent you the firmware via email. Please check.
“Hello Cudy Support.
Could I also get please the beta version of Firmware supporting WISP work mode for the WR3600H router?
Thx”
Hello Cudy Support.
Could I also get please the beta version of Firmware supporting WISP work mode for the WR3600H router?
Thx