WISP Mode:
In WISP mode, the router allows multiple users to share the internet connection from WISP. The LAN port devices share the same IP from the WISP via the wireless port in this manner. When connected to WISP, the wireless port functions as a WAN port.
Common network topology:
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: The Quick Setup window will pop up, choose "WISP", then go "Next".
Step 3: Choose your "Time Zone".
Step 4: Select the host network you want to extend. Click on 'Connect'.
Or click on General Settings->WISP->Enable and then select the host network you want to extend.
Step 5: Enter the host network's wireless password.
Note: Make sure the wireless password you type in is correct, otherwise, the configuration cannot success.
Step 6: Customize the wireless network name and password or keep them default.
Step 7: Click "Save & Apply" to complete the configuration.
Step 8: Wait a few seconds for the system rebooting, when the login page pops up again, you can enjoy the internet.
79 comments
@Dear Sergej,
Sorry, P5 doesn’t support WISP function now. There is no beta firmware for this function.
“Hello,
I have a Cudy P5 5G V1.1 router with latest 2.4.25 DE Firmware, and during the quick setup I do not have the option to set the mode to WISP.
Is there a firmware version that enables WISP mode for this router? A beta firmware would also be fine if available.
Thank you in advance for your help.”
Hi. I don’t have the Wisp menu in M3600 v1.0 (CUDY BE3600 WiFi 7 Mesh). Can you send me the beta version?
Hello,
I have a Cudy P5 5G V1.1 router with latest 2.4.25 DE Firmware, and during the quick setup I do not have the option to set the mode to WISP.
Is there a firmware version that enables WISP mode for this router? A beta firmware would also be fine if available.
Thank you in advance for your help.
@Dear Cel,
Our technical support has sent you the firmware via email. Please check.
“Hello. Could i get a beta version of Firmware supporting WISP work mode for WR3600E router?”
Hello. Could i get a beta version of Firmware supporting WISP work mode for WR3600E router?