警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
895 則留言
@Dear Ask,
You can download the OpenWrt firmware via this link.
https://openwrt.org/toh/views/toh_fwdownload
Search the “Cudy TR3000”,
You will find the OpenWrt firmwares. Choose the v1(256MB) and download the Sysupgrade image. The download link is:
https://downloads.openwrt.org/releases/24.10.4/targets/mediatek/filogic/openwrt-24.10.4-mediatek-filogic-cudy_tr3000-256mb-v1-squashfs-sysupgrade.bin
“Subject: Request for a Signed Stable Release of OpenWrt Firmware for Cudy TR3000 (256MB Flash)
Dear Cudy OpenWrt Team,
I recently purchased a Cudy TR3000 device with 256MB of flash. The transitional OpenWrt firmware I downloaded from Google Drive turned out to be a snapshot build:
Firmware Version: OpenWrt 23.05-SNAPSHOT r23001+886-38c150612c / LuCI openwrt-23.05 branch git-24.148.43905-2891ca4 Kernel Version: 5.15.158
Because this is a snapshot version, I am unable to install the appropriate `kmod-mtd-rw` package. As a result, I cannot proceed with the steps described in the official guide: [https://openwrt.org/toh/cudy/tr3000](https://openwrt.org/toh/cudy/tr3000).
Could you please provide a signed, stable release of the OpenWrt firmware suitable for the Cudy TR3000 (256MB flash version)?
Thank you for your assistance.
Best regards,
ASK"
@Dear Shai,
It depends on the hardware version, If it is V1.0, yes it supports OpenWrt. But you need to know, the Flash is only 16MB. If it is V2.0, then no, there is no OpenWrt firmware for the router now. There is very little memory to install the plugins. I suggest other models such as WR3000H,WR3000E,WR3000S, TR3000 etc. The Flash is 128MB.
“I want to buy WR3000-IL. Does this router support OpenWRT?
See e.g. https://store.omc.co.il/items/6026987”
@Dear Ayrat,
1. What is the SN number of your router?
2. Please recover the firmware of your router to Cudy official firmware first. Please refer to this article on the website below.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=184fed77e&ss=r
Note: you need to download the latest firmware for your router via the link. Then unzip it and rename it to recovery.bin before recovering.
https://www.cudy.com/pages/download-center/wr3000h-1-0
For the OpenWrt firmware, we have submitted a patch to OpenWrt forum. But still need time to merge it. Here is the patch we submit. If you can build the OpenWrt firmware, you can pull the new code to develop the OpenWrt firmware for your self.
https://github.com/openwrt/openwrt/pull/18619
“Hello, the new Cudy WR3000h has a new memory chip. When I update the firmware to OpenWRT, the router stops turning on. Could you tell me where I can download a new version of OpenWRT for this router? Thanks in advance!”
Dear Cudy Team,
Thank you for the recent OpenWrt notice regarding the new Flash chip compatibility (SN 2543+). This information confirms the complexity of flashing your routers.
I am writing to urgently request public confirmation that your R&D team is integrating a fix for a severe and proven performance bug in the WR3000S (V1.0) Firmware 2.4.6. My support case, which includes the requested Diagnosis Bin File, has gone unanswered.
The Critical Issue:
Problem: When the 5GHz band is set to 80MHz Channel Width and 802.11ax mode, the download speed drops drastically to ~3.89 Mbps (I have provided all technical proof to support).
Technical Root Cause: This is a confirmed driver-level issue, specifically the RRM (Radio Resource Management) bug: kern.err kernel: [ 3964.022354] 7981@C00L1,RRM_PeerNeighborReqAction() 846: snprintf error!
Since you are already developing a mandatory new firmware update to handle the new hardware restrictions (as per your notice), please confirm that the fix for this critical RRM performance bug will be integrated into that very next official firmware release for the WR3000S.
The router is currently unusable in its high-speed advertised mode due to this persistent bug. Please provide a clear timeline (ETA) for the official patch.
Subject: Request for a Signed Stable Release of OpenWrt Firmware for Cudy TR3000 (256MB Flash)
Dear Cudy OpenWrt Team,
I recently purchased a Cudy TR3000 device with 256MB of flash. The transitional OpenWrt firmware I downloaded from Google Drive turned out to be a snapshot build:
Firmware Version: OpenWrt 23.05-SNAPSHOT r23001+886-38c150612c / LuCI openwrt-23.05 branch git-24.148.43905-2891ca4 Kernel Version: 5.15.158Because this is a snapshot version, I am unable to install the appropriate `kmod-mtd-rw` package. As a result, I cannot proceed with the steps described in the official guide: [https://openwrt.org/toh/cudy/tr3000](https://openwrt.org/toh/cudy/tr3000).
Could you please provide a signed, stable release of the OpenWrt firmware suitable for the Cudy TR3000 (256MB flash version)?
Thank you for your assistance.
Best regards,
ASK