警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
895 則留言
Hi, i don’t see a AP3000 Ceiling OpenWRT intermediate firmware. How do i flash it to install openWRT ?
Now I see the problem, which comes from a confusion in the flashing order after our communication from Nov 14 and 17…
‘’@Dear JC,
Please download use the sysupgrade version.
“Hi,
From previous reply this morning, what you mean with Cudy Google drive is
https://firmware-selector.openwrt.org/ ?
There are 2 possible downloads from there for wr3000h: sysupgrade and kernel. What you call intermediate firmware is the kernel one?”’’
I then started with the sysupgrade !
Hi again,
I didn’t wait and I applied the procedure here: https://www.cudy.com/fr-fr/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware
The problem is the recovery.bin file doesn’t upload.
Hi,
I have the same problem as Manos on Nov 20th except I have a WR3000H.
“wanted to do Cudy WR3000 on OpenWRT and I installed the WR3000+V1 without recovery TFTP file. After it was completed, it told me to wait for the reboot, it never happened, it told me that I am not connected and now the cudy wr3000 does not start at all, it does not connect to any ip 192.168.1.1 or 192.168.10.1. What can I do?”
This cudy_wr3000h-v1-sysupgrade_20251119.bin file was not supposed to do this, I think.
Cudy M3000 1.0 kindly please add DNS over HTTPS. I’ve seen TP-Link Deco X50 has got it via firmware update but not my Cudy M3000 1.0 have it yet.
Also, my Cudy M3000 1.0 don’t have separate network creation for IoT devices!! TP-Link has this feature!!!