警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1530 則留言
@Dear Yaroslav,
Our technical support has sent you the firmware via email. Please check.
“@Dear support, I have a Cudy TR3000. Stock firmware 2.5.27-20260804-183625, SN: TR3000254500619. Please send me the correct Cudy-signed intermediate firmware”
@Dear support, I have a Cudy TR3000. Stock firmware 2.5.27-20260804-183625, SN: TR3000254500619. Please send me the correct Cudy-signed intermediate firmware
@Dear Vitaliy,
Our technical support has sent you the firmware via email. Please check.
“Hello.
I have a Cudy TR3000-256MB (hardware TR3000 256MB FLASH V1.0, label revision EAEU1.0), SN: S0001302262309298, stock firmware 2.5.27-20260804-190139.
I would like to install OpenWrt. Based on the serial number, I believe this unit has the new F50L1G41LC flash. Please send me:
(1) the correct Cudy-signed intermediate firmware for this exact unit, and confirm it supports the new flash;
(2) the official stock firmware for TR3000 256MB (R103) and instructions to restore it from OpenWrt;
(3) written confirmation of the warranty terms after installing OpenWrt.
Thank you."
Hello.
I have a Cudy TR3000-256MB (hardware TR3000 256MB FLASH V1.0, label revision EAEU1.0), SN: S0001302262309298, stock firmware 2.5.27-20260804-190139.
I would like to install OpenWrt. Based on the serial number, I believe this unit has the new F50L1G41LC flash. Please send me:
(1) the correct Cudy-signed intermediate firmware for this exact unit, and confirm it supports the new flash;
(2) the official stock firmware for TR3000 256MB (R103) and instructions to restore it from OpenWrt;
(3) written confirmation of the warranty terms after installing OpenWrt.
Thank you.
@Dear Arham,
There is no OpenWrt firmware for RE1200 currently. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
“Subject: Request: OpenWrt intermediate firmware for RE1200 V1.0 (same as RE1200 Outdoor)
Hello,
I’d like to install OpenWrt on my Cudy RE1200 V1.0 (current firmware: RE1200-R14-2.4.20-20250908-170954).
I understand that for the RE1200 Outdoor, Cudy provides a signed “intermediate firmware” that removes the bootloader’s firmware signature/image-name check, after which standard OpenWrt builds can be installed. Could you provide the equivalent intermediate firmware for the RE1200 V1.0 (board/image name “R14”)?
I previously contacted support about this and was told no OpenWrt firmware exists yet for the RE1200 V1.0, so no intermediate firmware is offered. Since the RE1200 V1.0 uses the same MT7628-based hardware and the same U-Boot signature-check mechanism as the RE1200 Outdoor (just a different board/image name, “R14” vs “R56”), I wanted to ask directly whether an R14-specific intermediate firmware could be built, the same way it was for the Outdoor.
If it would help, I’m happy to provide my current firmware version, board revision, or any other details needed.
Thank you for your time.
Arham"