Avvertenze
Questa pagina web elenca il software dei dispositivi che supportano il sistema OpenWrt. Prima di scaricare e installare il software, tieni presente che OpenWrt Project è un sistema operativo Linux destinato ai dispositivi incorporati. Invece di provare a creare un singolo firmware statico, OpenWrt fornisce un filesystem completamente scrivibile con gestione dei pacchetti. Ciò ti libera dalla selezione e configurazione dell'applicazione fornita dal fornitore e ti consente di personalizzare il dispositivo attraverso l'uso di pacchetti adatti a qualsiasi applicazione. Per gli sviluppatori, OpenWrt è il framework per creare un'applicazione senza dover costruire attorno ad essa un firmware completo; per gli utenti questo significa la possibilità di personalizzazione completa, di utilizzare il dispositivo in modi mai immaginati.
Descrizione
- Questo file può essere utilizzato solo quando il router funziona con l'interfaccia utente web di Cudy.
- Se il router funziona già con l'interfaccia utente OpenWRT, l'utente deve prima ripristinarlo sul firmware ufficiale Cudy. E poi aggiorna il router con questo firmware.
- Come ripristinare il router sul firmware ufficiale Cudy? Si prega di leggere il file Leggimi nel file scaricato.
Garanzia:
Cudy dichiara
- Noi, Cudy, non ci assumiamo alcuna garanzia per alcun software che non sia rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Non assumiamo alcuna garanzia per i prodotti che hanno installato software non rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Se hai bisogno di utilizzare il software openwrt, ti suggeriamo di scaricarlo dal sito Web ufficiale di Cudy.
Scarica il firmware OpenWrt per rimuovere il controllo della firma: Drive
Ricerca firmware OpenWrt (non rilasciato da Cudy): Selettore firmware OpenWrt
1319 commenti
Hello Cudy Support Team,
I have a Cudy TR3000 v1.0 router and would like to install OpenWrt on it.
Device details:
- Model: TR3000 v1.0
- Serial Number: S0006956260910307
- Current stock firmware version: 2.4.22-20251113-125907
Could you please:
1. Confirm which flash chip my unit uses (F50L1G41LB or F50L1G41LC) and the flash size (128 MB or 256 MB), based on the serial number above.
2. Send me the Cudy-signed OpenWrt intermediate firmware compatible with my hardware revision, so I can install OpenWrt without bricking the device.
Thank you in advance!
Best regards,
Astemir
@Dear Ilya,
Our technical support has sent you the firmware via email. Please check.
“Good afternoon,
I bought your router:
SN: TR3000255200919
Firmware Version : 2.4.22-20251113-125907
Model: TR3000
Hardware: TR3000 V1.0
I want to install OpenWrt on it.
As I understand it, an intermediate firmware is installed first, followed by OpenWrt?
Could you tell me where I can download the intermediate firmware (or the exact name on Google Drive, or please provide a link) and the necessary OpenWrt firmware file so I don’t brick the router?
Unfortunately, searching the internet doesn’t give a clear option, and there is a risk of turning the router into a brick.
Therefore, I am asking for help here.
Thanks in advance,
Kind regards,
Ilya"
Good afternoon,
I bought your router:
SN: TR3000255200919
Firmware Version : 2.4.22-20251113-125907
Model: TR3000
Hardware: TR3000 V1.0
I want to install OpenWrt on it.
As I understand it, an intermediate firmware is installed first, followed by OpenWrt?
Could you tell me where I can download the intermediate firmware (or the exact name on Google Drive, or please provide a link) and the necessary OpenWrt firmware file so I don’t brick the router?
Unfortunately, searching the internet doesn’t give a clear option, and there is a risk of turning the router into a brick.
Therefore, I am asking for help here.
Thanks in advance,
Kind regards,
Ilya
@Dear Connect Pro,
Our technical support has contacted you via email. Please check.
“Hello,
Thank you for your prompt reply.
Yes I did unzip the file and followed the instructions provided by Cudy and OpenWrt but the intermediate file is not being accepted by the firmware upgrade inside the C200P’s web user interface!”
Hello,
Thank you for your prompt reply.
Yes I did unzip the file and followed the instructions provided by Cudy and OpenWrt but the intermediate file is not being accepted by the firmware upgrade inside the C200P’s web user interface!