Modalità WISP:
In modalità WISP, il router consente a più utenti di condividere la connessione Internet da WISP. I dispositivi della porta LAN condividono in questo modo lo stesso IP dal WISP tramite la porta wireless. Quando è connessa a WISP, la porta wireless funziona come porta WAN.
Topologia di rete comune:
Passaggio 1: Apri un browser web e vai a http://cudy.net o http://192.168.10.1.
Per i dettagli, fare riferimento a Come accedere all'interfaccia web di Cudy Router?
Passaggio 2: Apparirà la finestra Configurazione rapida, scegli "WISP", quindi vai su "Avanti".
Passaggio 3: Scegli il tuo "Fuso orario".
Passaggio 4: Seleziona la rete host che desideri estendere. Fai clic su "Connetti".
Oppure fai clic su Impostazioni generali->WISP->Abilita e quindi seleziona la rete host che desideri estendere.
Passaggio 5: Inserisci la password wireless della rete host.
Nota: Assicurati che la password wireless digitata sia corretta, altrimenti la configurazione non potrà avere successo.
Passaggio 6: Personalizza il nome e la password della rete wireless o mantienili predefiniti.
Passaggio 7: Fai clic su "Salva e applica" per completare la configurazione.
Passaggio 8: Attendi qualche secondo per il riavvio del sistema, quando viene nuovamente visualizzata la pagina di accesso, puoi goderti Internet.
83 commenti
@Dear TH,
TR3000 doesn’t support connecting to the PEAP Wi-Fi network currently. We will feed back this to Cudy R&D team to evaluate if we can support in future.
“I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?”
I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?
@Dear Pavel,
I think it is related to the 5G WiFi channel. Please set the 5GHz channel of your existing WiFi to one of the 36-48, then check if the problem fixed?
“I have a problem setting up wisp mesh network – Cudy doesn’t see my 5G wifi network, only 2g. therefore the speed is low if I do mesh with WIPS 2g, I can’t find my 5g network, my laptop, phone etc see this network. Cudy – no. Pls help”
@Dear Jon,
1. We suggest you to use the WISP mode. And bind the MAC address of the TR3000.(You need to check the WiFi mac address first) You can connect it to your existing WiFi network first, then check the WiFi MAC address of the WISP interface on the WiFi client list of the exist WiFi’s WEB page.
2. I can’t for sure about it. If the Portal Wi-Fi has no limit. It will work.
3. For now, TR3000 doesn’t support MAC clone function. We will try to develop this function in future.
“For sharing hotel or cruise ship Captive Portal Wifi when they only allow 1 device to connect but you want the TR3000 to allow multiple personal devices to connect is WISP mode the recommended mode? Does this work with Captive Portal on the hotel/cruise ships side? If so how do you configure MAC address cloning so the router uses my iPhone’s MAC address?”
@Dear Z
We just sent you again. Please check.
“Thank you, no email received for now”