Modalità WISP:
In modalità WISP, il router consente a più utenti di condividere la connessione Internet da WISP. I dispositivi della porta LAN condividono in questo modo lo stesso IP dal WISP tramite la porta wireless. Quando è connessa a WISP, la porta wireless funziona come porta WAN.
Topologia di rete comune:
Passaggio 1: Apri un browser web e vai a http://cudy.net o http://192.168.10.1.
Per i dettagli, fare riferimento a Come accedere all'interfaccia web di Cudy Router?
Passaggio 2: Apparirà la finestra Configurazione rapida, scegli "WISP", quindi vai su "Avanti".
Passaggio 3: Scegli il tuo "Fuso orario".
Passaggio 4: Seleziona la rete host che desideri estendere. Fai clic su "Connetti".
Oppure fai clic su Impostazioni generali->WISP->Abilita e quindi seleziona la rete host che desideri estendere.
Passaggio 5: Inserisci la password wireless della rete host.
Nota: Assicurati che la password wireless digitata sia corretta, altrimenti la configurazione non potrà avere successo.
Passaggio 6: Personalizza il nome e la password della rete wireless o mantienili predefiniti.
Passaggio 7: Fai clic su "Salva e applica" per completare la configurazione.
Passaggio 8: Attendi qualche secondo per il riavvio del sistema, quando viene nuovamente visualizzata la pagina di accesso, puoi goderti Internet.
110 commenti
@Hi Moises，
Our technical support has sent you the firmware via email. Please check.
“Hello Cudy Support. Could I also get please the beta version of Firmware supporting WISP work mode for the WR6500H router?
Thx”
Hello Cudy Support. Could I also get please the beta version of Firmware supporting WISP work mode for the WR6500H router?
Thx
@Dear Peter Tomaščík,
Our technical support has sent you the firmware via email. Please check.
“I recently purchased the Cudy WR6500 as an upgrade to my older Cudy WR3000. My original plan was to use the new WR6500 as my main router and repurpose the WR3000 as a Mesh node to extend my network coverage.
However, I ran into a major issue: the WISP mode is missing in the WR6500 settings, whereas it works perfectly fine on the older WR3000.
Because the WR6500 lacks WISP support, I am currently forced to use it only as a Mesh extension instead of the main router, which completely degrades its performance and defeats the purpose of the upgrade.
Could the support team or anyone here provide me with a firmware version for the WR6500 that includes the WISP functionality?”
@Dear Lawson,
Please go to “General Settings” —"WISP " function page to set it up.
“I have the 4GvLTE N300 V3.0
I’ve got firmware 2.5.12 installed, but still no WISP
Could you send me the firmware that allows for Wisp please. I’m happy to test it if it’s Beta.”
@Dear John,
I think yes. WR1200 supports WISP function to connect the main Wi-Fi via wireless. But you must check if the signal strength starlink mini wifi router at the placement of WR1200 is powerful enough to connect to?
“Hi, can I use the wr1200 to feed wired internet into my lan from a starlink mini wifi router. I would like to not have a wire from the starlink into my existing lan which covers 4 floors of a concrete building. Is this compatible.
Thank you.”