Un client VPN è un dispositivo terminale o un software utilizzato per stabilire una connessione sicura tra un utente e un server VPN.
Che cos'è la VPN?
VPN (Virtual Private Network) ti aiuta ad accedere alle risorse Internet in remoto, in modo sicuro e privato con la tecnologia di tunneling. La VPN crittografa le tue informazioni personali e nasconde il tuo indirizzo IP al pubblico quando usi Internet. Agli utenti della VPN sembrerà che i computer fossero direttamente collegati tra loro.
Topologia di rete comune:
Qui prendiamo WR2100 come dimostrazione.
Passaggio 1: Apri un browser web e vai a http://cudy.net o http://192.168.10.1.
Per i dettagli, fare riferimento a Come accedere all'interfaccia web di Cudy Router?
Passaggio 2: fai clic su Impostazioni generali->VPN e attiva VPN.
Regola predefinita: Consenti a tutti i dispositivi o Blocca a tutti i dispositivi di utilizzare la VPN.
Per specificare il dispositivo, fare clic su Stato del sistema- > Dispositivi->VPN per attivarlo o disattivarlo.
Da sito a sito: < /strong>Consenti ai dispositivi in due siti di comunicare tra loro.
Politica VPN:
Disabilita: nessuna impostazione aggiuntiva.
Kill switch VPN: Disattiva la connettività Internet quando si perde la connessione VPN.
Dominio: specifica quali domini passano attraverso la VPN e che non lo fanno
Sottorete remota: specifica quali sottoreti passano attraverso la VPN e quali no
Passaggio 3: Nella Protocollo , seleziona quello che ti serve e inserisci le informazioni sulla VPN fornite dal tuo provider VPN.
• VPN PPTP
Inserisci l'indirizzo del server VPN (ad esempio, 113.92.73.163) e il nome utente e la password VPN fornito dal tuo provider VPN.
• VPN L2TP
Inserisci l'indirizzo del server VPN (ad esempio 113.92.73.163), nome utente e password VPN e chiave precondivisa forniti dal tuo Fornitore VPN.
Se il tuo provider VPN ti fornisce anche l'IP del tunnel che si collega all'account, puoi abilitare Utilizza l'opzione IP tunnel personalizzato.
• OpenVPN < /span>
Fare clic su Browser per importare il file di configurazione fornito da il tuo provider VPN.
• WireGuard VPN
Fare clic su Browser per importare il file di configurazione fornito da il tuo provider VPN.
L'interfaccia e Peer si sincronizzerà automaticamente dal file CONF del tuo provider VPN.
• ZeroTier Slave
Digita ID rete ZeroTier e Gateway fornito da ZeroTier Master. Il gateway è disponibile nella parte Stato VPN.
Articolo correlato: Come connettere in remoto Cudy Router tramite Zerotier?-Cudy Home
197 commenti
Salut ,
J’ai configurer un client Open Vpn via Nord Vpn sur mon routeur WR3000 en utilisant le tuto Cudy , et cela a parfaitement fonctionner sauf qu’au moment ou je lance la lecture de vidéo Netflix , cela ne passe pas mais cela passe sur tout autre plateforme normalement , je précise que j’ai bien téléchargé le client VPN en protocole UDP . donc ma question est de savoir comment faire pour y remédier ou de savoir si il y’a une autre alternative pour que la plateforme Netflix fonctionne correctement
@Dear Felice,
Please enable the VPN kill switch function, Then all the traffics from the clients will go through VPN connection.
“Hi,
I am using a Cudy AX3000 router configured as an OpenVPN client (ExpressVPN).
I have observed the following behavior:
The router itself connects correctly to the VPN and gets an IP in the VPN country. However, LAN clients do not appear to have their DNS traffic routed through the VPN tunnel by default. DNS queries from LAN clients are resolved via the WAN interface unless additional workarounds are implemented.
I would like to clarify:
1. Does the OpenVPN client on this router support full-tunnel routing for all LAN devices (i.e. all traffic, including DNS, forced through the VPN interface)?
2. Is there a setting to ensure DNS queries from LAN clients are always routed through the VPN tunnel and not via the WAN?
3. Does the “VPN kill switch” function enforce routing of LAN traffic through the VPN, or only block traffic when the VPN is down?
4. Are there firmware versions or models that support proper policy-based routing (e.g. select devices or all LAN traffic via VPN)?
My goal is to have all LAN devices fully routed through the VPN, including DNS, without relying on external DNS proxies or additional devices.
Thank you for your support."
Hi,
The router itself connects correctly to the VPN and gets an IP in the VPN country. However, LAN clients do not appear to have their DNS traffic routed through the VPN tunnel by default. DNS queries from LAN clients are resolved via the WAN interface unless additional workarounds are implemented.I am using a Cudy AX3000 router configured as an OpenVPN client (ExpressVPN).
I have observed the following behavior:
I would like to clarify:
1. Does the OpenVPN client on this router support full-tunnel routing for all LAN devices (i.e. all traffic, including DNS, forced through the VPN interface)?
2. Is there a setting to ensure DNS queries from LAN clients are always routed through the VPN tunnel and not via the WAN?
3. Does the “VPN kill switch” function enforce routing of LAN traffic through the VPN, or only block traffic when the VPN is down?
4. Are there firmware versions or models that support proper policy-based routing (e.g. select devices or all LAN traffic via VPN)?
My goal is to have all LAN devices fully routed through the VPN, including DNS, without relying on external DNS proxies or additional devices.
Thank you for your support.
@Dear Rado,
Is it L2TP or L2TP over IPSec? Is there a preshared key?
“I have a AC1200 Wireless mini VPN router.
I would like to setup l2tp VPN via double NATed.
Is there a way how to setup rightID? As currently VPN is failing on IDir ‘’ does not match to ’’”
“I have a AC1200 Wireless mini VPN router.
I would like to setup l2tp VPN via double NATed.
Is there a way how to setup rightID? As currently VPN is failing on IDir ‘’ does not match to ’’”
I have a AC1200 Wireless mini VPN router.
I would like to setup l2tp VPN via double NATed.
Is there a way how to setup rightID? As currently VPN is failing on IDir ‘’ does not match to ’’