M21000
1.0
Demnächst verfügbar
| Modellversion | ||
|---|---|---|
| Modellversion | M21000 1.0 | |
| CPU | ||
| CPU | CPU Details | 1.5 GHz Quad-Core CPU |
| Memory/Storage | ||
| Memory/Storage | Flash/ROM | 128 MB (1 Gbit) NAND |
| DDR/RAM | 1 GB (8 Gbit) DDR4 | |
| Wireless | ||
| Wireless | 6 GHz Wi-Fi Speed | 11529 Mbps |
| 5 GHz Wi-Fi Speed |
5765 Mbps (160 MHz) 8647 Mbps (240 MHz) |
|
| 2.4 GHz Wi-Fi Speed | 688 Mbps | |
| 6 GHz Wi-Fi Streams | 4T4R (4×4 MIMO) | |
| 5 GHz Wi-Fi Streams | 4T4R (4×4 MIMO) | |
| 2.4 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
| Wi-Fi Antennas | 6× Fixed | |
| FEM or PA/LNA |
|
|
| Beamforming | True | |
| Range Performance |
Max: 260 m (853 ft) Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions. |
|
| Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'') |
|
| Indoor Coverage Reference |
2 Pack: 280 m² (3000 sq ft) 3 Pack: 370 m² (4000 sq ft) Applied to wireless backhaul situation. Place in the center of each floor, with a maximum of three obstacles to each room. |
|
| Interfaces | ||
| Interfaces | 10G SFP+ Slots | 1 |
| 2.5G RJ45 Ports | 4 | |
| Ethernet Notes | The SFP+ slot is WAN/LAN configurable, 1× RJ45 WAN port, and the rest are LAN ports | |
| USB-A 3.0 Ports | 1 | |
| LED |
|
|
| Physical Buttons |
|
|
| Power Input | DC Jack | |
| Power | ||
| Power | Power Methods | DC |
| DC Input | 12V 3A | |
| Power Adapter |
Input: 100 ~ 240 V, 50/60 Hz AC Output: 12V 2A DC |
|
| Max Power Consumption (W) | 36W | |
| Idle Power Consumption (W) | 15W | |
| Reliability | ||
| Reliability | Environment |
|
| Certifications | ||
| Certifications | FCC, CE | |
| Mechanical | ||
| Mechanical | Installation | Desktop |
| Dimension |
Φ116×202 mm Φ4.57×7.95 inches |
|
| Package Content | ||
| Package Content |
|
|
| Ordering Information | ||
| Ordering Information | Retail Package Dimension |
1-Pack: 313×152×132 mm 12.32×5.98×5.2 inches,2-Pack: 366×251×132 mm 14.41×9.88×5.2 inches |
| Units per Carton |
|
|
| Carton Dimension |
|
|
| Modellversion | ||
|---|---|---|
| Modellversion | M21000 1.0 | |
| Wireless | ||
| Wireless | Wi-Fi Standards | Wi-Fi 7 |
| Max Wi-Fi Modulation | 4K-QAM | |
| Wi-Fi Efficiency |
|
|
| Max Capacity | 384 | |
| Recommended Client Upper Limit | 200 | |
| Max Wi-Fi Channel Width | 320 MHz | |
| Wi-Fi Security | WPA/WPA2/WPA3 | |
| Guest Network | 2.4 GHz, 5 GHz, 6 GHz | |
| WPS | True | |
| General | ||
| General | Operation Modes |
|
| Mesh | Cudy Mesh | |
| Mesh Backhaul |
|
|
| Multi-Band Backhaul | True | |
| WAN Mode |
|
|
| Network | ||
| Network | QoS | Per-User Rate Limiting |
| DHCP |
|
|
| IP Versions | IPv4/IPv6 | |
| IPv6 Protocols |
|
|
| IPTV/VLAN |
|
|
| TTL Customization |
|
|
| IGMP |
|
|
| Forwarding |
|
|
| Firewall |
|
|
| Application Layer Gateway |
|
|
| Utilities | ||
| Utilities | VPN Server |
|
| VPN Client |
|
|
| VPN Performance |
|
|
| DNS Options |
|
|
| DNS over TLS Providers |
|
|
| USB Functions | Samba Server | |
| Wake on LAN | True | |
| Online Detection | True | |
| Management | ||
| Management | Parental Controls |
|
| All Devices Management |
|
|
| Per-Devices Management |
|
|
| Content Management |
|
|
| System | ||
| System | LED Control | True |
| Local Control Method |
|
|
| Remote Control Method |
|
|
| Firmware Upgrade |
|
|
| Reliability |
|
|
| Diagnostic Tools |
|
|
| Languages |
|
|
| Dashboard | ||
| Dashboard | Panel |
|
| Charts |
|
|
- Der tatsächliche drahtlose Datendurchsatz variiert je nach Netzwerkbedingungen, Client-Einschränkungen und Umgebungsfaktoren wie Gebäudelayout, Hindernissen und Client-Standort.
- Die tatsächliche Leistung mehrerer Geräte kann durch die Art der verwendeten Anwendungen, die insgesamt verfügbare Bandbreite und die Fähigkeiten Ihrer Geräte beeinflusst werden. Das Anschließen älterer WLAN-Geräte (ältere Standards) kann die Gesamteffizienz beeinträchtigen. Für die Nutzung von Effizienzfunktionen sind kompatible Clientgeräte erforderlich, die diese Funktionen ebenfalls unterstützen. Weitere Informationen zu unterstützten Effizienzfunktionen finden Sie im Abschnitt „Software“ der Tabelle „Spezifikationen“.