WR5000
Planung
Modellversion | ||
---|---|---|
Modellversion | WR5000 1.0 | |
CPU | ||
CPU | Chipset | MT7991 |
CPU Details | Dual-Core, ARM Cortex-A53 | |
Memory/Storage | ||
Memory/Storage | Flash/ROM | 128 MB (1 Gbit) NAND |
DDR/RAM | 512 MB (4 Gbit) DDR3L | |
Wireless | ||
Wireless | 5 GHz Wi-Fi Speed | 4320 Mbps |
2.4 GHz Wi-Fi Speed | 688 Mbps | |
5 GHz Wi-Fi Streams | 3T3R (3×3 MIMO) | |
2.4 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
Wi-Fi Antennas | 4× Fixed | |
5 GHz Antenna Gain Max | 5.5dBi | |
2.4 GHz Antenna Gain Max | 5.4dBi | |
FEM or PA/LNA |
|
|
Beamforming | True | |
Range Performance |
Max: 220 m (722 ft) Indoor WiFi range varies depending on the layout and wall materials. See Wall Performance spec for placement suggestions. |
|
Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'') |
|
Interfaces | ||
Interfaces | 2.5G RJ45 Ports | 1 |
Gigabit RJ45 Ports | 4 | |
Ethernet Notes | The 2.5G port is WAN port, the Gigabit ports are LAN ports | |
LED |
|
|
Physical Buttons |
|
|
Power Input | DC Jack | |
Power | ||
Power | Power Methods | DC |
DC | 12V 1.5A | |
Power Adapter |
Input: 100 ~ 240 V, 50/60 Hz AC Output: 12V 1A DC |
|
Max Power Consumption (W) | 12W | |
Reliability | ||
Reliability | Environment |
|
Certifications | ||
Certifications | FCC, CE | |
Mechanical | ||
Mechanical | Installation |
|
Dimension |
183.3×109×35 mm 7.22×4.29×1.38 inches |
|
Package Content | ||
Package Content |
|
|
Ordering Information | ||
Ordering Information | Retail Package Dimension |
240×230×60 mm 9.45×9.06×2.36 inches |
Units per Carton | 20 | |
Carton Dimension |
49.5×32.5×48 cm 19.49×12.8×18.9 inches |
Modellversion | ||
---|---|---|
Modellversion | WR5000 1.0 | |
Wireless | ||
Wireless | Wi-Fi Standards | Wi-Fi 7 |
Max Wi-Fi Modulation | 4K-QAM | |
Wi-Fi Efficiency |
|
|
Max Capacity | 512 | |
Recommended Client Upper Limit | 200 | |
Max Wi-Fi Channel Width | 160 MHz | |
Wi-Fi Security | WPA/WPA2/WPA3 | |
Guest Network | 2.4 GHz, 5 GHz | |
WPS | True | |
General | ||
General | Operation Modes |
|
Mesh | Cudy Mesh | |
Mesh Backhaul |
|
|
Multi-Band Backhaul | true | |
WAN Mode |
|
|
Internet Failover Sequence |
|
|
Network | ||
Network | QoS | Per-User Rate Limiting |
DHCP |
|
|
IP Versions | IPv4/IPv6 | |
IPv6 Protocols |
|
|
IPTV/VLAN |
|
|
TTL Customization |
|
|
IGMP |
|
|
Forwarding |
|
|
Firewall |
|
|
Application Layer Gateway |
|
|
Utilities | ||
Utilities | VPN Server |
|
VPN Client |
|
|
DNS Options |
|
|
DNS over TLS Providers |
|
|
Wake on LAN | True | |
Online Detection | True | |
Management | ||
Management | All Devices Management |
|
Per-Devices Management |
|
|
Content Management |
|
|
System | ||
System | LED Control | ture |
Local Control Method |
|
|
Remote Control Method |
|
|
Firmware Upgrade |
|
|
Reliability |
|
|
Diagnostic Tools |
|
|
Languages |
|
|
Dashboard | ||
Dashboard | Panel |
|
Charts |
|
- Der tatsächliche drahtlose Datendurchsatz variiert je nach Netzwerkbedingungen, Client-Einschränkungen und Umgebungsfaktoren wie Gebäudelayout, Hindernissen und Client-Standort.
- Die tatsächliche Leistung mehrerer Geräte kann durch die Art der verwendeten Anwendungen, die insgesamt verfügbare Bandbreite und die Fähigkeiten Ihrer Geräte beeinflusst werden. Das Anschließen älterer WLAN-Geräte (ältere Standards) kann die Gesamteffizienz beeinträchtigen. Für die Nutzung von Effizienzfunktionen sind kompatible Clientgeräte erforderlich, die diese Funktionen ebenfalls unterstützen. Weitere Informationen zu unterstützten Effizienzfunktionen finden Sie im Abschnitt „Software“ der Tabelle „Spezifikationen“.