警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1319 則留言
Dear Cudy Support Team,
I am writing to request the correct intermediate firmware file needed to install OpenWrt on my router.
My router details are:
· Model: Cudy WR3000E
· Hardware Version: v1.0
· Current Firmware Version: 2.2.6-20240902-033948
I have tried several intermediate files, but they were rejected. Could you please provide me with the correct intermediate firmware file compatible with my current firmware version?
Thank you for your assistance.
@Dear grzegorz,
What is the model of your Cudy AP?
my device:
Firmware Version 2.4.7-20260115-152710
Historic Version 2.4.7-20260115-152710
Model AP3000
Hardware AP3000 V1.0
“help mi !!
File is invalid. Please retry.
Uploaded File: openwrt-25.12.0-mediatek-filogic-cudy_ap3000wall-v1-squashfs-sysupgrade.bin
Size: 9.00 MB (9441562 B)
MD5: 72827a30761e73dee7020e58c7d7c477"
Dear Cudy Support,
I have WR3000S v1 with serial number starting with 2551 (new Flash F50L1G41LC). I read your notice from December 24, 2025, that new intermediate firmwares for affected models have been uploaded to Google Drive.
However, when I open your Google Drive folder, I cannot find any folder for WR3000S v1. The folders I see are:
TR3000 256MB Flash V1
AP1300 Outdoor V1.0
AP1300 V1.0
AP3000 Outdoor 1.0
AP3000 Wall 1.0
C200P_V1
Cudy Russia File Upload Form
LT400E_V1
Where can I download the correct new intermediate firmware for WR3000S v1? Please provide a direct link or tell me which folder contains it.
Thank you!
@Dear grzegorz,
What is the model of your Cudy AP?
“help mi !!
File is invalid. Please retry.
Uploaded File: openwrt-25.12.0-mediatek-filogic-cudy_ap3000wall-v1-squashfs-sysupgrade.bin
Size: 9.00 MB (9441562 B)
MD5: 72827a30761e73dee7020e58c7d7c477"
@Dear Bourn,
I think no. The AP3000’s LAN port is 2.5Gbps. But the AP3000D’s LAN port is 1Gbps port. So please develop the OpenWrt firmware first.