什麼是存取點模式？ >
存取點模式是路由器使用與主路由器或數據機路由器的有線連接來擴展家庭網路的無線覆蓋範圍.< /span>
常見網路拓樸：
第 1 步：開啟網頁瀏覽器並造訪 http://cudy.net 或http://192.168.10.1。
詳情請參閱如何登入網頁介面Cudy 路由器？ >
第2 步： 將彈出"快速設定"窗口，選擇"無線存取點"，然後點選"下一步"< /strong> .
第 3 步： 選擇您的"時區"。
第 4 步：確認硬體連線。
第 5 步： 更改無線網路名稱和密碼。
第 6 步： 點選"儲存並套用"完成設定。
第7步： 等待幾秒鐘系統重新啟動，當再次彈出登入頁面時，您就可以享受網路了。
注意： 將Cudy路由器設定為Access Point模式後，IP位址將由主機路由器分配，預設IP位址192.168.10.1將無法登入。 "http://cudy.net/">http://cudy.net"，或在主（主）路由器的客戶端尋找Cudy 路由器的IP 位址清單。
56 則留言
Hi
If i setup a Cudy Wr3000s/e/h/p (one of them) in wifi ap mode, im i still able to use the ethernet ports to connect to desktops / other clients?
can you also let me know the differences between the s/e/h/p models of wr3000?
thanks.
@Dear Mike,
Please follow the steps:
1. Please update the latest firmware 2.4.5 for AP1300. You can download the firmware on the website.
https://www.cudy.com/pages/download-center/ap1300-1-0
2. Please reset all the three AP1300 that you want to work as the submesh AP. Setup the Wi-Fi settings of the main mesh AP1300.
3. Install them in the same network (in the same management VLAN). The mesh system will be installed automatically.
4. Please test and check if the network in working normally, as you want.
“Hello Cudy Hardware & Software Developer’s team!)
I have 4 (four) Cudy AP1300. For my business project, I need build MESH with multi SSID via many VLAN’s:
SSID1 – VLAN10 – 192.168.10.0/24 – CORP-WIFI
SSID2 – VLAN20 – GUEST-WIFI
192.168.20.0/24
ETH1 trunk-mode (include VLAN10-VLAN20-VLAN30) – VLAN30 – 192.168.30.0/24 – MGMT & mesh connector.
How I do it?
All switches in my company support vlans”
Hello Cudy Hardware & Software Developer’s team!)
I have 4 (four) Cudy AP1300. For my business project, I need build MESH with multi SSID via many VLAN’s:
SSID1 – VLAN10 – 192.168.10.0/24 – CORP-WIFI
SSID2 – VLAN20 – GUEST-WIFI
192.168.20.0/24
ETH1 trunk-mode (include VLAN10-VLAN20-VLAN30) – VLAN30 – 192.168.30.0/24 – MGMT & mesh connector.
How I do it?
All switches in my company support vlans
@Dear Damian,
Sorry, M3000 doesn’t support this feature.
“Is it possible to implement multiple SSIDs for the M3000 model? I need this for a separate IoT network (in NAT or bridge mode – your choice).”
Is it possible to implement multiple SSIDs for the M3000 model? I need this for a separate IoT network (in NAT or bridge mode – your choice).