什麼是存取點模式？ >
存取點模式是路由器使用與主路由器或數據機路由器的有線連接來擴展家庭網路的無線覆蓋範圍.< /span>
常見網路拓樸：
第 1 步：開啟網頁瀏覽器並造訪 http://cudy.net 或http://192.168.10.1。
詳情請參閱如何登入網頁介面Cudy 路由器？ >
第2 步： 將彈出"快速設定"窗口，選擇"無線存取點"，然後點選"下一步"< /strong> .
第 3 步： 選擇您的"時區"。
第 4 步：確認硬體連線。
第 5 步： 更改無線網路名稱和密碼。
第 6 步： 點選"儲存並套用"完成設定。
第7步： 等待幾秒鐘系統重新啟動，當再次彈出登入頁面時，您就可以享受網路了。
注意： 將Cudy路由器設定為Access Point模式後，IP位址將由主機路由器分配，預設IP位址192.168.10.1將無法登入。 "http://cudy.net/">http://cudy.net"，或在主（主）路由器的客戶端尋找Cudy 路由器的IP 位址清單。
56 則留言
@Dear Mark,
Yes, it’s true. There is no Guest Network function when working on the Access Point mode.
“Hello, I’ve purchased one AX3000, I want to setup it as Access Point, not as router, I’ve read that is not possible setup a wifi for guest or setup additional SSID, is it true?
Thanks and regards,”
Hello, I’ve purchased one AX3000, I want to setup it as Access Point, not as router, I’ve read that is not possible setup a wifi for guest or setup additional SSID, is it true?
Thanks and regards,
@Dear Marian,
Thank you for your kindly advice! We will provide your feedback to the product department for evaluation.
“Add vlan support for the routers. Or give ssh access so the users can create their own VLANs. Dont limit the usage of the routers”
Add vlan support for the routers. Or give ssh access so the users can create their own VLANs. Dont limit the usage of the routers
@Dear naz,
Yes, the LAN ports are still work. You can connect the devices to the LAN ports to share the network.
For WR3000, the main difference is that it uses the 16MB Flash. Other routers use 128MB Flash. Then WR3000 has to delete some functions, such as IPSec VPN, DNS over TLS, Zerotoer VPN etc. Other routers support all of these functions.
“Hi
If i setup a Cudy Wr3000s/e/h/p (one of them) in wifi ap mode, im i still able to use the ethernet ports to connect to desktops / other clients?
can you also let me know the differences between the s/e/h/p models of wr3000?
thanks.”