什麼是存取點模式？ >
存取點模式是路由器使用與主路由器或數據機路由器的有線連接來擴展家庭網路的無線覆蓋範圍.< /span>
常見網路拓樸：
第 1 步：開啟網頁瀏覽器並造訪 http://cudy.net 或http://192.168.10.1。
詳情請參閱如何登入網頁介面Cudy 路由器？ >
第2 步： 將彈出"快速設定"窗口，選擇"無線存取點"，然後點選"下一步"< /strong> .
第 3 步： 選擇您的"時區"。
第 4 步：確認硬體連線。
第 5 步： 更改無線網路名稱和密碼。
第 6 步： 點選"儲存並套用"完成設定。
第7步： 等待幾秒鐘系統重新啟動，當再次彈出登入頁面時，您就可以享受網路了。
注意： 將Cudy路由器設定為Access Point模式後，IP位址將由主機路由器分配，預設IP位址192.168.10.1將無法登入。 "http://cudy.net/">http://cudy.net"，或在主（主）路由器的客戶端尋找Cudy 路由器的IP 位址清單。
67 則留言
..
@Dear Christopher,
Our technical support has sent you the solutions via email. Please check.
“Hello. I purchased a WR3600 Wi-Fi 7 unit (though the box says “BE”). I bought it primarily to use as an access point (AP), connecting it via Ethernet to my PC. When I reset the device, the network works reasonably well; however, once I configure it as a wireless access point, I run into internet connectivity issues. The Wi-Fi signal keeps dropping and reappearing, often showing “no internet,” and the Ethernet connection also experiences intermittent drops. What can I try to get it working properly? So far, the only thing I’ve attempted is disabling the DHCP server, as suggested in another comment. I’m not sure why the network keeps dropping out—any advice would be appreciated. Thanks!”
Hello. I purchased a WR3600 Wi-Fi 7 unit (though the box says “BE”). I bought it primarily to use as an access point (AP), connecting it via Ethernet to my PC. When I reset the device, the network works reasonably well; however, once I configure it as a wireless access point, I run into internet connectivity issues. The Wi-Fi signal keeps dropping and reappearing, often showing “no internet,” and the Ethernet connection also experiences intermittent drops. What can I try to get it working properly? So far, the only thing I’ve attempted is disabling the DHCP server, as suggested in another comment. I’m not sure why the network keeps dropping out—any advice would be appreciated. Thanks!
@Estimado Eliasaf:
¿Cuál es el modelo de tu producto Cudy? ¿Cómo quieres utilizarlo?
“Me sale mal porque no se configurarlo”
Me sale mal porque no se configurarlo