Cudy Whole Home Mesh 系統旨在消除死區並在整個家庭中提供不間斷的 Wi-Fi。本文將引導您逐步建立一個Mesh Wi-Fi 系統。
準備工作：
1.確保您至少擁有 2 個 Cudy 產品。 Cudy所有產品均支援Mesh技術：首頁Mesh-Cudy官網
3.韌體是最新的：下載中心
4.配置時將它們放在同一個房間。將所有 Cudy 產品重設為出廠預設值。 （開機狀態下，用大頭針按住RESET按鈕6秒，然後放開。）
6.設定主路由器並使其連接到網際網路。
第 1 步：開啟網頁瀏覽器並造訪 http://cudy.net 或 http://192.168.10.1。
詳情請參考如何登入Cudy Router的Web介面？
第2步：在系統狀態頁面，點選"+"按鈕。
步驟 3：按 M1800 上的 WPS 按鈕，然後按下 WR2100 上的 WPS 按鈕。
主網格單元：白色閃爍
附加網格單元：白色和紅色交替閃爍
第4步：它將轉到"正在掃描"，然後"正在連接"。
第 5 步：等待附加路由器的系統 LED 變成藍色常亮，然後重新定位 WR2100。
第 6 步：成功並享受網狀網路。
註：
1. 4/5G 路由器只能設定為主網單元。例如：
2.您將無法登入附加網狀路由器的 Web 介面。如果您想要變更設置，請點選"系統狀態"->"網格"。
83 則留言
Good morning. I need the updated firmware for the WR6500 router as the main mesh router and three M3000 units as mesh satellites. Can you send it to me by email?
Thank you.
@Dear Matej,
I suggest you use the WR3000P currently since WR6500H’s official firmware still doesn’t support Mesh function.
It is better to connect all the mesh devices via cable. More stable and faster.
“Hi,
Thank you for your prompt reply.
I am deciding between the WR3000P and WR6500H as the main unit/router in my mesh system, along with the AP3000 Outdoor and AP3000 as APs. Will the entire system work on Wi-Fi 6 or within the range of the WR6500H Wi-Fi 7, and outside its range, Wi-Fi 6? Is it better to connect the APs to the main router with cables or wirelessly?
What do you recommend? And since the APs will be powered over PoE, what PoE switch do you recommend for this setting?
Thank you."
Hi,
Thank you for your prompt reply.
I am deciding between the WR3000P and WR6500H as the main unit/router in my mesh system, along with the AP3000 Outdoor and AP3000 as APs. Will the entire system work on Wi-Fi 6 or within the range of the WR6500H Wi-Fi 7, and outside its range, Wi-Fi 6? Is it better to connect the APs to the main router with cables or wirelessly?
What do you recommend? And since the APs will be powered over PoE, what PoE switch do you recommend for this setting?
Thank you.
Matt
“@Dear Matt,
For now, yes, but you need to update the firmware to the new firmware which we can send it to you. Please check the model of your BE6500 router first. Is it WR6500H or WR6500?
Hi,
Can a Wi-Fi 7 Router (BE6500) be connected to a Wi-Fi 6 AP (Outdoor AX3000)?
Thanks.
Matt”
@Dear Matt,
For now, yes, but you need to update the firmware to the new firmware which we can send it to you. Please check the model of your BE6500 router first. Is it WR6500H or WR6500?
“Hi,
Can a Wi-Fi 7 Router (BE6500) be connected to a Wi-Fi 6 AP (Outdoor AX3000)?
Thanks.
Matt”
Hi,
Can a Wi-Fi 7 Router (BE6500) be connected to a Wi-Fi 6 AP (Outdoor AX3000)?
Thanks.
Matt