Cudy Whole Home Mesh 系統旨在消除死區並在整個家庭中提供不間斷的 Wi-Fi。本文將引導您逐步建立一個Mesh Wi-Fi 系統。
準備工作：
1.確保您至少擁有 2 個 Cudy 產品。 Cudy所有產品均支援Mesh技術：首頁Mesh-Cudy官網
3.韌體是最新的：下載中心
4.配置時將它們放在同一個房間。將所有 Cudy 產品重設為出廠預設值。 （開機狀態下，用大頭針按住RESET按鈕6秒，然後放開。）
6.設定主路由器並使其連接到網際網路。
第 1 步：開啟網頁瀏覽器並造訪 http://cudy.net 或 http://192.168.10.1。
詳情請參考如何登入Cudy Router的Web介面？
第2步：在系統狀態頁面，點選"+"按鈕。
步驟 3：按 M1800 上的 WPS 按鈕，然後按下 WR2100 上的 WPS 按鈕。
主網格單元：白色閃爍
附加網格單元：白色和紅色交替閃爍
第4步：它將轉到"正在掃描"，然後"正在連接"。
第 5 步：等待附加路由器的系統 LED 變成藍色常亮，然後重新定位 WR2100。
第 6 步：成功並享受網狀網路。
註：
1. 4/5G 路由器只能設定為主網單元。例如：
2.您將無法登入附加網狀路由器的 Web 介面。如果您想要變更設置，請點選"系統狀態"->"網格"。
83 則留言
I have 3 AP 1300 and 1 AC1200 outdoor all in mesh mode. AP 1300 all connected by LAN via L2 switches to server and AC 1200 by wi-fi.
All ap’s in one subnet and the clients in other. they all respond to ping and have stable connection. But when clients from same subnet ping each other it only work in same AP coverage. When one of clients moved to any other AP they lost each other however if they ping server or one of AP’s it work perfectly. so what’s the problem, why they not share arp table between each other?
@Dear Ahmed,
Yes, you install mesh system with M1200 and WR1300.
“Can I make a mesh between M1200 and WR1300 ? I have one M1200, if this is possible then I will buy WR 1300. Thanks.”
Can the TR3000 be connected in a mesh network with two M3000 v2 units? I need a USB port to be available in the mesh network.
Can I make a mesh between M1200 and WR1300 ? I have one M1200, if this is possible then I will buy WR 1300. Thanks.
@Dear ANTONIO,
Our technical support has sent you the firmware via email. Please check.
“Good morning. I need the updated firmware for the WR6500 router as the main mesh router and three M3000 units as mesh satellites. Can you send it to me by email?
Thank you.”