Cudy Whole Home Mesh 系統旨在消除死區並在整個家庭中提供不間斷的 Wi-Fi。本文將引導您逐步建立一個Mesh Wi-Fi 系統。
準備工作：
1.確保您至少擁有 2 個 Cudy 產品。 Cudy所有產品均支援Mesh技術：首頁Mesh-Cudy官網
3.韌體是最新的：下載中心
4.配置時將它們放在同一個房間。將所有 Cudy 產品重設為出廠預設值。 （開機狀態下，用大頭針按住RESET按鈕6秒，然後放開。）
6.設定主路由器並使其連接到網際網路。
第 1 步：開啟網頁瀏覽器並造訪 http://cudy.net 或 http://192.168.10.1。
詳情請參考如何登入Cudy Router的Web介面？
第2步：在系統狀態頁面，點選"+"按鈕。
步驟 3：按 M1800 上的 WPS 按鈕，然後按下 WR2100 上的 WPS 按鈕。
主網格單元：白色閃爍
附加網格單元：白色和紅色交替閃爍
第4步：它將轉到"正在掃描"，然後"正在連接"。
第 5 步：等待附加路由器的系統 LED 變成藍色常亮，然後重新定位 WR2100。
第 6 步：成功並享受網狀網路。
註：
1. 4/5G 路由器只能設定為主網單元。例如：
2.您將無法登入附加網狀路由器的 Web 介面。如果您想要變更設置，請點選"系統狀態"->"網格"。
83 則留言
Hi,
I have no cudy router as my main router, I’m going to disable wifi on that router and cerate mesh system viavwired backhaul. can I connect via eth 2 cudy m3000 and 2 ap3000 and cerate wired mesh between them with having fast roaming without creating subnet.
@Dear Kamil,
Yes, you can. Cudy mesh system supports Wired Backhaul. You can connect the WAN port of the satellite to the main mesh. It will work.
“Hi,
I have four wr3600e routers. One set as main router, and three as sattelites in wifi mesh mode. Can I connect one of them also with ethernet cable, to main router, to have better connection. This one is outside the building, and has low signal. BR Kamil”
Hi,
I have four wr3600e routers. One set as main router, and three as sattelites in wifi mesh mode. Can I connect one of them also with ethernet cable, to main router, to have better connection. This one is outside the building, and has low signal. BR Kamil
Dear Mionain, 1. What is the backhaul type between the main mesh AP and other APs? Wired or Wireless? 2. Is the problem on 2.4GHz or 5GHz or both? 3. When the problem occurs again, please login to the web page of the router, download the Diagnosis bin file in "Diagnostic Tools"->"Diagnosis"->"GO"->"Download", and send the file to me. My email address is samcudy.com.
“I have a Cudy AP3000 mesh network controller installed, and six AP1300 access points are connected to it via mesh networking. Wi-Fi is constantly disconnecting on mobile devices, both on the main Wi-Fi network and on the guest network. In extended mode, the phone displays the following error: “NETWORK_SELECTION_DISABLED_AUTHENTICATION_FAILED=3 NETWORK_SELECTION_DISABLED DHCP_FAILURE=1”
Meanwhile, the main router shows everything is fine, and none of the access points have disconnected from the mesh network. Computers are working reliably, but phones are constantly disconnecting. All access points are running the latest firmware. Could you please tell me what to do?"
I have a Cudy AP3000 mesh network controller installed, and six AP1300 access points are connected to it via mesh networking. Wi-Fi is constantly disconnecting on mobile devices, both on the main Wi-Fi network and on the guest network. In extended mode, the phone displays the following error: “NETWORK_SELECTION_DISABLED_AUTHENTICATION_FAILED=3 NETWORK_SELECTION_DISABLED DHCP_FAILURE=1”
Meanwhile, the main router shows everything is fine, and none of the access points have disconnected from the mesh network. Computers are working reliably, but phones are constantly disconnecting. All access points are running the latest firmware. Could you please tell me what to do?