Cudy Whole Home Mesh 系統旨在消除死區並在整個家庭中提供不間斷的 Wi-Fi。本文將引導您逐步建立一個Mesh Wi-Fi 系統。
準備工作：
1.確保您至少擁有 2 個 Cudy 產品。 Cudy所有產品均支援Mesh技術：首頁Mesh-Cudy官網
3.韌體是最新的：下載中心
4.配置時將它們放在同一個房間。將所有 Cudy 產品重設為出廠預設值。 （開機狀態下，用大頭針按住RESET按鈕6秒，然後放開。）
6.設定主路由器並使其連接到網際網路。
第 1 步：開啟網頁瀏覽器並造訪 http://cudy.net 或 http://192.168.10.1。
詳情請參考如何登入Cudy Router的Web介面？
第2步：在系統狀態頁面，點選"+"按鈕。
步驟 3：按 M1800 上的 WPS 按鈕，然後按下 WR2100 上的 WPS 按鈕。
主網格單元：白色閃爍
附加網格單元：白色和紅色交替閃爍
第4步：它將轉到"正在掃描"，然後"正在連接"。
第 5 步：等待附加路由器的系統 LED 變成藍色常亮，然後重新定位 WR2100。
第 6 步：成功並享受網狀網路。
註：
1. 4/5G 路由器只能設定為主網單元。例如：
2.您將無法登入附加網狀路由器的 Web 介面。如果您想要變更設置，請點選"系統狀態"->"網格"。
26 則留言
I have an AP1300. Can i buy another AP1300 and Mesh them?
@Slawek,
Dear Customer,
Thanks for contacting the Cudy support team. For now, WR3600 doesn’t support Mesh funciton, but we will release the new firmware to support it soon.
WR3600 support Access Point mode now. But for mesh function, please wait some days.
“Please let me know if WR-3600 has Mesh support? Please also know me if is possible set router in Access Point mode (bridge traffic and DHCP) as Mesh main router?”
Please let me know if WR-3600 has Mesh support? Please also know me if is possible set router in Access Point mode (bridge traffic and DHCP) as Mesh main router?
@Владимир Владимир,
No, can not be used like this.
“Subject: Mesh Configuration with LT500 and WR1300 Routers
Dear Support Team,
I understand that the LT500 can only function as a main Mesh router and cannot be used as a satellite node.
I currently have three routers:
LT500
WR1300
LT500
Two of the LT500 units have access to the internet via 4G.
Is it possible to set up a Mesh network where all three devices are working together?
For example:
LT500 (main) + WR1300 (satellite)
The second LT500 (also with 4G) + the same WR1300 (as a satellite again)
In other words, can the same WR1300 be linked as a Mesh satellite to two separate LT500 routers?
Thank you for your assistance."
Subject: Mesh Configuration with LT500 and WR1300 Routers
Dear Support Team,
I understand that the LT500 can only function as a main Mesh router and cannot be used as a satellite node.
I currently have three routers:
LT500
WR1300
LT500
Two of the LT500 units have access to the internet via 4G.
Is it possible to set up a Mesh network where all three devices are working together?
For example:
LT500 (main) + WR1300 (satellite)
The second LT500 (also with 4G) + the same WR1300 (as a satellite again)
In other words, can the same WR1300 be linked as a Mesh satellite to two separate LT500 routers?
Thank you for your assistance.