Cudy Whole Home Mesh 系統旨在消除死區並在整個家庭中提供不間斷的 Wi-Fi。本文將引導您逐步建立一個Mesh Wi-Fi 系統。
準備工作：
1.確保您至少擁有 2 個 Cudy 產品。 Cudy所有產品均支援Mesh技術：首頁Mesh-Cudy官網
3.韌體是最新的：下載中心
4.配置時將它們放在同一個房間。將所有 Cudy 產品重設為出廠預設值。 （開機狀態下，用大頭針按住RESET按鈕6秒，然後放開。）
6.設定主路由器並使其連接到網際網路。
第 1 步：開啟網頁瀏覽器並造訪 http://cudy.net 或 http://192.168.10.1。
詳情請參考如何登入Cudy Router的Web介面？
第2步：在系統狀態頁面，點選"+"按鈕。
步驟 3：按 M1800 上的 WPS 按鈕，然後按下 WR2100 上的 WPS 按鈕。
主網格單元：白色閃爍
附加網格單元：白色和紅色交替閃爍
第4步：它將轉到"正在掃描"，然後"正在連接"。
第 5 步：等待附加路由器的系統 LED 變成藍色常亮，然後重新定位 WR2100。
第 6 步：成功並享受網狀網路。
註：
1. 4/5G 路由器只能設定為主網單元。例如：
2.您將無法登入附加網狀路由器的 Web 介面。如果您想要變更設置，請點選"系統狀態"->"網格"。
83 則留言
@Dear Tib,
May be the signal strength of the P4 received by the M3000 is very weak at the placement of the M3000. Please try to adjust the placement of both routers to enhance the signal strength and check if the problem is avoided?
“I have a set if m3000 v1 and a p4 v1. The p4 is the mai router as I live in an area where internet fluctuates and it’s good for mobile feature. The problem is i have these m3000 i cannot connect to the p4. It only works with the cable. Are they incompatible? I am unable to find this information. The thing is when I try to add from p4 app they are discovered, but fail on connecting. Firmware are up to date on all. I even reset all to factory. I am writing this as cable is not a good option fo me. Should I put one of the m3000 as main router?
Thanks.”
I have a set if m3000 v1 and a p4 v1. The p4 is the mai router as I live in an area where internet fluctuates and it’s good for mobile feature. The problem is i have these m3000 i cannot connect to the p4. It only works with the cable. Are they incompatible? I am unable to find this information. The thing is when I try to add from p4 app they are discovered, but fail on connecting. Firmware are up to date on all. I even reset all to factory. I am writing this as cable is not a good option fo me. Should I put one of the m3000 as main router?
Thanks.
@Dear Geoffrey,
Thank you for advice. We have plan to add this feature in the future.
“As per Drew’s comment, I would like to also like a device to be able to prefer a particular node on a mesh network. I think that this would be a useful feature. I have a situation (that I’m still looking into) where my mobile phone will only connect with my streamer if they are both using the same mesh node – not sure why at the moment.
Geoff”
As per Drew’s comment, I would like to also like a device to be able to prefer a particular node on a mesh network. I think that this would be a useful feature. I have a situation (that I’m still looking into) where my mobile phone will only connect with my streamer if they are both using the same mesh node – not sure why at the moment.
Geoff
@Dear Drew,
Thank you for your kindly advice. We will provide your feedback to the product department for evaluation.
“Please make it so you can set devices to prefer a particular node on the mesh network. I want to benefit from the WiFi 7 MLO on my laptop, but sometimes it will switch to the secondary node and I don’t get the same benefits. This should be an easy feature-add! Thank you! We also need more control over clients, especially on guest networks.”