WR1300S
Boosted Coverage, Lower Latency
Direction Detected, Signal Boosted
More Devices. Lower Latency.
Cudy Mesh
Fast Roaming Thoughout Your Place
Cudy Mesh
Fast Roaming Thoughout Your Place
Super-Fast Wired Speed
Super-Fast Wired Speed
Parental Control
Parental Control
Applicazione Cudy
Applicazione Cudy
| Versione del modello | ||
|---|---|---|
| Versione del modello | WR1300S 1.0 | |
| CPU | ||
| CPU | CPU Details | 880 MHz Dual-Core, MIPS1004Kc |
| Memory/Storage | ||
| Memory/Storage | Flash/ROM | 16 MB (128 Mbit) NOR |
| DDR/RAM | 128 MB (1 Gbit) DDR3 | |
| Wireless | ||
| Wireless | 5 GHz Wi-Fi Speed | 867 Mbps |
| 2.4 GHz Wi-Fi Speed | 300 Mbps | |
| 5 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
| 2.4 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
| Wi-Fi Antennas | 4× Fixed | |
| FEM or PA/LNA |
|
|
| Beamforming | True | |
| Range Performance |
Max: 170 m (558 ft) Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions. |
|
| Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') |
|
| Interfaces | ||
| Interfaces | Gigabit RJ45 Ports | 5 |
| Ethernet Notes | 1× WAN port, the rest are LAN ports | |
| USB-A 3.0 Ports | 1 | |
| LED |
|
|
| Physical Buttons |
|
|
| Power Interfaces | DC Jack | |
| Power | ||
| Power | Power Methods | DC |
| Power Input | 12V⎓1.5A | |
| Power Adapter in the Box |
Input: 100-240V~, 50/60Hz Output: 12V⎓1.5A |
|
| Reliability | ||
| Reliability | Environment |
|
| Certifications | ||
| Certifications | FCC, CE | |
| Mechanical | ||
| Mechanical | Installation |
|
| Dimension |
Device: 183.3×109×38 mm 7.22×4.29×1.5 inches Each Antenna: 175 mm 6.89 inches |
|
| Product Weight | 284.0 g (10.02 oz.) | |
| Package Content | ||
| Package Content |
|
|
| Ordering Information | ||
| Ordering Information | Retail Package Weight | EU: 729.4 g (25.73 oz.) |
| Retail Package Dimension |
330×256×60 mm 12.99×10.08×2.36 inches |
|
| Units per Carton | 10 | |
| Carton Dimension |
52.8×31.7×34.7 cm 20.79×12.48×13.66 inches |
|
| Carton Gross Weight | EU: 8.0 kg (17.64 lbs) | |
| Carton Net Weight | EU: 7.29 kg (16.07 lbs) | |
| Versione del modello | ||
|---|---|---|
| Versione del modello | WR1300S 1.0 | |
| Wireless | ||
| Wireless | Wi-Fi Standards | Wi-Fi 5 |
| Max Wi-Fi Modulation | 256-QAM | |
| Wi-Fi Efficiency | MU-MIMO | |
| Wi-Fi Efficiency Note | MU-MIMO available on 5 GHz | |
| Max Capacity | 128 | |
| Recommended Client Upper Limit | 50 | |
| Max Wi-Fi Channel Width | 80 MHz | |
| Wi-Fi Security | WPA/WPA2/WPA3 | |
| Guest Network | 2.4 GHz, 5 GHz | |
| WPS | True | |
| General | ||
| General | Operation Modes |
|
| Mesh | Cudy Mesh | |
| Mesh Backhaul |
|
|
| Multi-Band Backhaul | True | |
| WAN Mode |
|
|
| Network | ||
| Network | QoS | Per-User Rate Limiting |
| DHCP |
|
|
| IP Versions | IPv4/IPv6 | |
| IPv6 Protocols |
|
|
| IPTV/VLAN |
|
|
| TTL Customization |
|
|
| IGMP |
|
|
| Forwarding |
|
|
| Firewall |
|
|
| Application Layer Gateway |
|
|
| Utilities | ||
| Utilities | VPN Server |
|
| VPN Client |
|
|
| VPN Performance |
|
|
| DNS Options |
|
|
| DNS over TLS Providers |
|
|
| USB Functions | Samba Server | |
| Wake on LAN | True | |
| Online Detection | True | |
| Max Concurrent VPN Tunnels |
|
|
| Management | ||
| Management | Parental Controls |
|
| All Devices Management |
|
|
| Per-Devices Management |
|
|
| Content Management |
|
|
| System | ||
| System | Local Control Method |
|
| Remote Control Method |
|
|
| Firmware Upgrade |
|
|
| Reliability |
|
|
| Diagnostic Tools |
|
|
| Languages |
|
|
| Dashboard | ||
| Dashboard | Panel |
|
| Charts |
|
|
- La velocità effettiva dei dati wireless varierà in base alle condizioni della rete, alle limitazioni del client e a fattori ambientali tra cui la disposizione dell'edificio, gli ostacoli e la posizione del client.
- Le prestazioni effettive per più dispositivi potrebbero essere influenzate dai tipi di applicazioni utilizzate, dalla larghezza di banda totale disponibile e dalle funzionalità dei dispositivi. Il collegamento di dispositivi Wi-Fi meno recenti (standard legacy) può ridurre l'efficienza complessiva. L'utilizzo delle funzionalità di efficienza richiede dispositivi client compatibili che supportino anche tali funzionalità. Puoi trovare ulteriori informazioni sulle funzionalità di efficienza supportate nella sezione software del foglio di calcolo delle specifiche.
- La dichiarazione di copertura wireless serve solo come riferimento. Le prestazioni di copertura varieranno a causa di fattori ambientali tra cui la disposizione dell'edificio, gli ostacoli, il volume e la densità del traffico e la posizione del dispositivo. Per una copertura ottimale, posizionare il dispositivo in una posizione centrale all'interno dell'area che richiede Wi-Fi.