Solo Cudy router che sono stati aggiornati a un firmware la versione che supporta la gestione dell'APP Cudy può essere gestita utilizzando l'APP.
Pertanto, è molto probabile che il tuo router Cudy non sia stato aggiornato a una versione del firmware che supporti la gestione delle APP.
Puoi scaricare l'APP Cudy scansionando il codice QR qui sotto.
Scarica la versione più recente del firmware per eseguire l'aggiornamento.
Centro download< /p>
Modello: i prodotti wireless di Cudy rilasceranno gradualmente nuovo firmware per supportare la gestione delle APP. La tabella seguente elenca alcuni modelli di prodotto che già supportano APP. Potrebbero essere stati rilasciati altri modelli. Vai al centro download per verificare il nuovo firmware.
| WR1300 V2 & V3 |
| M3000 |
| M1300 |
| M1200 |
| WR3000 |
| WR1200 |
| WR1500 |
| M1800 |
| X6 |
| WR1300E V2 |
| LT700E |
| LT15E |
27 commenti
@Estimado Yonnel,
¿Cuál es la versión del firmware ahora?
“No puedo administrar mi router cudy AX1500 con la aplicación Cudy y intento actualizar el firmware 2025 y no lo admite dice formato de archivo inválido”
No puedo administrar mi router cudy AX1500 con la aplicación Cudy y intento actualizar el firmware 2025 y no lo admite dice formato de archivo inválido
@Dear Bartek,
Thank you for contacting Cudy support team.
If you want to use like this, please set it to the Access Point mode. Please follow the steps:
1. Disconnect the cable from your ISP router, connect the WAN port of WR3600 to your ISP router.
2. Disconnect and reconnect the phone to the router. Then you will be able to login in to the WEB page or see it in Cudy APP. Please set it to the Wireless Access Point mode. Then the router will disable NAT function. And you can also manage it via the APP or cudy.net.
“i dont see my brand new cudy wr3600 in app, nor in cudy.net, or even in 192.168.10.1,wifi and lan internet works, but i would like to acces config, i have connected it lan1-lan1 to my isp router/modem combo, and lan2 of cudy to my pc. i did it that way to not create double NAT, is it a problem? i would like it to stay in that config and still have access to admin panel”
i dont see my brand new cudy wr3600 in app, nor in cudy.net, or even in 192.168.10.1
wifi and lan internet works, but i would like to acces config, i have connected it lan1-lan1 to my isp router/modem combo, and lan2 of cudy to my pc. i did it that way to not create double NAT, is it a problem? i would like it to stay in that config and still have access to admin panel
@Wasem,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has sent you the solutions via email. Please check.
“WR 1500 isn’t working on app even though it’s mentioned in your website and bought 2 router accordingly.
The second thing I don’t know how to connect 2 wr 1500 as easy mesh to have same ssid
I don’t know how to configure easy mesh”