Avvertenze
Questa pagina web elenca il software dei dispositivi che supportano il sistema OpenWrt. Prima di scaricare e installare il software, tieni presente che OpenWrt Project è un sistema operativo Linux destinato ai dispositivi incorporati. Invece di provare a creare un singolo firmware statico, OpenWrt fornisce un filesystem completamente scrivibile con gestione dei pacchetti. Ciò ti libera dalla selezione e configurazione dell'applicazione fornita dal fornitore e ti consente di personalizzare il dispositivo attraverso l'uso di pacchetti adatti a qualsiasi applicazione. Per gli sviluppatori, OpenWrt è il framework per creare un'applicazione senza dover costruire attorno ad essa un firmware completo; per gli utenti questo significa la possibilità di personalizzazione completa, di utilizzare il dispositivo in modi mai immaginati.
Descrizione
- Questo file può essere utilizzato solo quando il router funziona con l'interfaccia utente web di Cudy.
- Se il router funziona già con l'interfaccia utente OpenWRT, l'utente deve prima ripristinarlo sul firmware ufficiale Cudy. E poi aggiorna il router con questo firmware.
- Come ripristinare il router sul firmware ufficiale Cudy? Si prega di leggere il file Leggimi nel file scaricato.
Garanzia:
Cudy dichiara
- Noi, Cudy, non ci assumiamo alcuna garanzia per alcun software che non sia rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Non assumiamo alcuna garanzia per i prodotti che hanno installato software non rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Se hai bisogno di utilizzare il software openwrt, ti suggeriamo di scaricarlo dal sito Web ufficiale di Cudy.
Scarica il firmware OpenWrt per rimuovere il controllo della firma: Drive
Ricerca firmware OpenWrt (non rilasciato da Cudy): Selettore firmware OpenWrt
1319 commenti
Now I see the problem, which comes from a confusion in the flashing order after our communication from Nov 14 and 17…
‘’@Dear JC,
Please download use the sysupgrade version.
“Hi,
From previous reply this morning, what you mean with Cudy Google drive is
https://firmware-selector.openwrt.org/ ?
There are 2 possible downloads from there for wr3000h: sysupgrade and kernel. What you call intermediate firmware is the kernel one?”’’
I then started with the sysupgrade !
Hi again,
I didn’t wait and I applied the procedure here: https://www.cudy.com/fr-fr/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware
The problem is the recovery.bin file doesn’t upload.
Hi,
I have the same problem as Manos on Nov 20th except I have a WR3000H.
“wanted to do Cudy WR3000 on OpenWRT and I installed the WR3000+V1 without recovery TFTP file. After it was completed, it told me to wait for the reboot, it never happened, it told me that I am not connected and now the cudy wr3000 does not start at all, it does not connect to any ip 192.168.1.1 or 192.168.10.1. What can I do?”
This cudy_wr3000h-v1-sysupgrade_20251119.bin file was not supposed to do this, I think.
Cudy M3000 1.0 kindly please add DNS over HTTPS. I’ve seen TP-Link Deco X50 has got it via firmware update but not my Cudy M3000 1.0 have it yet.
Also, my Cudy M3000 1.0 don’t have separate network creation for IoT devices!! TP-Link has this feature!!!
@Dear JC,
You router still uses the old Flash model. You can update the OpenWrt firmware. Don’t worry about it.
2513 in the SN means the thirteen week in the year 2025. At that time, we still uses the old flash.
“Hi,
I’ve just received my WR3000H from Amazon. I intended to switch to OpenWRT but I’m learning that you changed the ROM in this model recently and the flash will no longer work until your proposed patch has been validated and merged.
First, is my model with S/N WR3000H251301647 EU1.0 concerned? How can I check? I won’t open the device.
Second, what should I do now?”