Avvertenze
Questa pagina web elenca il software dei dispositivi che supportano il sistema OpenWrt. Prima di scaricare e installare il software, tieni presente che OpenWrt Project è un sistema operativo Linux destinato ai dispositivi incorporati. Invece di provare a creare un singolo firmware statico, OpenWrt fornisce un filesystem completamente scrivibile con gestione dei pacchetti. Ciò ti libera dalla selezione e configurazione dell'applicazione fornita dal fornitore e ti consente di personalizzare il dispositivo attraverso l'uso di pacchetti adatti a qualsiasi applicazione. Per gli sviluppatori, OpenWrt è il framework per creare un'applicazione senza dover costruire attorno ad essa un firmware completo; per gli utenti questo significa la possibilità di personalizzazione completa, di utilizzare il dispositivo in modi mai immaginati.
Descrizione
- Questo file può essere utilizzato solo quando il router funziona con l'interfaccia utente web di Cudy.
- Se il router funziona già con l'interfaccia utente OpenWRT, l'utente deve prima ripristinarlo sul firmware ufficiale Cudy. E poi aggiorna il router con questo firmware.
- Come ripristinare il router sul firmware ufficiale Cudy? Si prega di leggere il file Leggimi nel file scaricato.
Garanzia:
Cudy dichiara
- Noi, Cudy, non ci assumiamo alcuna garanzia per alcun software che non sia rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Non assumiamo alcuna garanzia per i prodotti che hanno installato software non rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Se hai bisogno di utilizzare il software openwrt, ti suggeriamo di scaricarlo dal sito Web ufficiale di Cudy.
Scarica il firmware OpenWrt per rimuovere il controllo della firma: Drive
Ricerca firmware OpenWrt (non rilasciato da Cudy): Selettore firmware OpenWrt
1319 commenti
I, just bought a new WR3000 v2 in europe (on amazon). Seems good hardware, but there’s no firmware with signature removal available.
Please support help us (I will ask for a refound on Amazon otherwise !!!)
@Dear Alexei,
Please download the WR3000+V1 without recovery TFTP.zip in the google drive.
“Hello Cudy Support Team,
I have a Cudy WR3000 v1.0 router.
Serial Number 255306528
I would like to install OpenWrt on my router. Could you please provide the Cudy-signed intermediate firmware compatible with my hardware revision?
Thank you.”
“Hello Cudy Support Team,
I have a Cudy WR3000 v1.0 router.
Serial Number 255306528
I would like to install OpenWrt on my router. Could you please provide the Cudy-signed intermediate firmware compatible with my hardware revision?
Thank you.”
@Уважаемый Никита,
Нет, прошивки OpenWRT для WR3600H 1.0 нет. Мы не планируем добавлять поддержку X-Ray.
“добрый день. подскажите когда выйдет для WR3600H 1.0 сделаете нормальную прошивку под openwrt или добавите xray для модели WR3600H 1.0”
@Dear Roman,
TR3000 V1_20251118.zip is the correct one. Please unzip the file before update.
“Hello Cudy Support. I have a Cudy TR3000 V1.0, serial number TR3000255201678 (SN code 2552, so this unit has the new flash chip F50L1G41LC). I would like to install OpenWrt. The Google Drive folder only has the older TR3000 intermediate firmware (“TR3000 V1_20251118.zip”), which per your November 24, 2025 notice is not compatible with the new flash. Could you please send/provide the correct new-flash intermediate (signature-removal) firmware for the TR3000 V1.0? Thank you very much!”
@Dear Ilya,
No, The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
“Hello, could you provide the OpenWrt firmware for the WR3000 V2.0? There is no intermediate version available on Google Drive.”