Avvertenze
Questa pagina web elenca il software dei dispositivi che supportano il sistema OpenWrt. Prima di scaricare e installare il software, tieni presente che OpenWrt Project è un sistema operativo Linux destinato ai dispositivi incorporati. Invece di provare a creare un singolo firmware statico, OpenWrt fornisce un filesystem completamente scrivibile con gestione dei pacchetti. Ciò ti libera dalla selezione e configurazione dell'applicazione fornita dal fornitore e ti consente di personalizzare il dispositivo attraverso l'uso di pacchetti adatti a qualsiasi applicazione. Per gli sviluppatori, OpenWrt è il framework per creare un'applicazione senza dover costruire attorno ad essa un firmware completo; per gli utenti questo significa la possibilità di personalizzazione completa, di utilizzare il dispositivo in modi mai immaginati.
Descrizione
- Questo file può essere utilizzato solo quando il router funziona con l'interfaccia utente web di Cudy.
- Se il router funziona già con l'interfaccia utente OpenWRT, l'utente deve prima ripristinarlo sul firmware ufficiale Cudy. E poi aggiorna il router con questo firmware.
- Come ripristinare il router sul firmware ufficiale Cudy? Si prega di leggere il file Leggimi nel file scaricato.
Garanzia:
Cudy dichiara
- Noi, Cudy, non ci assumiamo alcuna garanzia per alcun software che non sia rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Non assumiamo alcuna garanzia per i prodotti che hanno installato software non rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Se hai bisogno di utilizzare il software openwrt, ti suggeriamo di scaricarlo dal sito Web ufficiale di Cudy.
Scarica il firmware OpenWrt per rimuovere il controllo della firma: Drive
Ricerca firmware OpenWrt (non rilasciato da Cudy): Selettore firmware OpenWrt
1319 commenti
@Dear Adorfer,
Our technical support has sent you the firmware via email. Please check.
“where do i find the Openwrt intermediate Firmware (Cudy signed) for
AP3000v1 (AX3000 ceiling mount EU1.0)?
I tried different versions (wall/outdoor) from your google drive without success (e.g. AP3000v1-wall, AP3000-outdoor). If it’s there, please indicate the filename.
Updating the AP3000V1 from 1.1.6.4 to 2.4.6 before didn’t help either.”
@Dear Mehdi,
There is no OpenWrt firmware for LT500 currently.
“I need to open ssh on cudy Lt500
I could not find any image for that”
where do i find the Openwrt intermediate Firmware (Cudy signed) for
AP3000v1 (AX3000 ceiling mount EU1.0)?
I tried different versions (wall/outdoor) from your google drive without success (e.g. AP3000v1-wall, AP3000-outdoor). If it’s there, please indicate the filename.
Updating the AP3000V1 from 1.1.6.4 to 2.4.6 before didn’t help either.
I need to open ssh on cudy Lt500
I could not find any image for that
@Dear Cudy team,
I can’t use the TR3000. V1_20251118.zip in the Google Drive. Since this is the OpenWRT version 24.10.4. I wrote about it that it will turn my Cudy TR3000 “into a brick”, since my Cudy already has a new flash chip (indicated by SN number). I need a new version from you – 24.10.5, I asked when this version will be available? or if it exists, how and where can I find it?
“@Dear Alexander996,
The intermediata firmware is TR3000 V1_20251118.zip in the Google Drive. Please download it and update.
“Dear Cudy team. I want to flash my Cudy TR3000 router (serial number TR30002545, that is, with a new flash memory chip). And I need OpenWRT version 24.10.5. But you don’t have this version on google drive (there is only 24.10.4), which will turn my Cudy TR3000 into a brick. When will the official release “transitional” version of OpenWRT 24.10.5 from cudy? So that I can upgrade/flash my Cudy router? Could you please send me the official version, which is suitable for my model (with new flash memory chips)?”