Avvertenze
Questa pagina web elenca il software dei dispositivi che supportano il sistema OpenWrt. Prima di scaricare e installare il software, tieni presente che OpenWrt Project è un sistema operativo Linux destinato ai dispositivi incorporati. Invece di provare a creare un singolo firmware statico, OpenWrt fornisce un filesystem completamente scrivibile con gestione dei pacchetti. Ciò ti libera dalla selezione e configurazione dell'applicazione fornita dal fornitore e ti consente di personalizzare il dispositivo attraverso l'uso di pacchetti adatti a qualsiasi applicazione. Per gli sviluppatori, OpenWrt è il framework per creare un'applicazione senza dover costruire attorno ad essa un firmware completo; per gli utenti questo significa la possibilità di personalizzazione completa, di utilizzare il dispositivo in modi mai immaginati.
Descrizione
- Questo file può essere utilizzato solo quando il router funziona con l'interfaccia utente web di Cudy.
- Se il router funziona già con l'interfaccia utente OpenWRT, l'utente deve prima ripristinarlo sul firmware ufficiale Cudy. E poi aggiorna il router con questo firmware.
- Come ripristinare il router sul firmware ufficiale Cudy? Si prega di leggere il file Leggimi nel file scaricato.
Garanzia:
Cudy dichiara
- Noi, Cudy, non ci assumiamo alcuna garanzia per alcun software che non sia rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Non assumiamo alcuna garanzia per i prodotti che hanno installato software non rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Se hai bisogno di utilizzare il software openwrt, ti suggeriamo di scaricarlo dal sito Web ufficiale di Cudy.
Scarica il firmware OpenWrt per rimuovere il controllo della firma: Drive
Ricerca firmware OpenWrt (non rilasciato da Cudy): Selettore firmware OpenWrt
1319 commenti
Hi Cudy,
I accidently bought V2 of WR3000, expecting V1 to flash OpenWrt. While the router is cheap, I am now stuck with a device that could do a lot more if the official OpenWrt is supported!
What was the reason to stop supporting it? It is such a disappointment. Can’t you help the OpenWrt project to support V2 by telling them how you got your version working (which is clearly based on OpenWrt)?
Surely this will cost you potential customers to move away from Cudy? Myself included unfortunately, I will need to replace a functioning router :(
Hello. I can’t update, serial number WR3000S 2552. An error appears when trying to update. File is invalid. Please retry.
Uploaded File: cudy_wr3000s-v1-sysupgrade_20251119.bin
Size: 14.25 MB (14945872 B)
MD5: e7d613561bbf699ccf65ce41630219f5
Hw: WR3000H v1.0, fw: 2.4.5-20250515-105059
Dear Cudy Support Team,
A few days ago, I bought your router, connected it to the ONT, configured PPPoE and VLAN, and forwarded ports to be visible on torrent trackers.
To my surprise, the redirection does not work. Websites that check port openness (no matter which port I open) always show closed, fail, connection refused, etc.
Is it just me, or does this software version contain a bug that no one has noticed before?
Can I somehow install the official version of OpenWrt and check if that helps? Can you provide me with a specific link to the software and instructions on how to do it so that I don’t brick the router?
For clarity, I will add information about my environment:
- Debian 13 headless,
- Firewall on the host disabled,
- DMZ, regardless of whether it is enabled or disabled, does not work,
- UPnP changes nothing,
- I am not behind CGNAT.
Hello Cudy team!
Is OpenWRT support planned for the M3600 and WR6500/H devices? I’m really looking forward to the firmware for them
Please send AP3000 intermediate firmware (Realtek PHY, not Motorcomm). Thank you.