Avvertenze
Questa pagina web elenca il software dei dispositivi che supportano il sistema OpenWrt. Prima di scaricare e installare il software, tieni presente che OpenWrt Project è un sistema operativo Linux destinato ai dispositivi incorporati. Invece di provare a creare un singolo firmware statico, OpenWrt fornisce un filesystem completamente scrivibile con gestione dei pacchetti. Ciò ti libera dalla selezione e configurazione dell'applicazione fornita dal fornitore e ti consente di personalizzare il dispositivo attraverso l'uso di pacchetti adatti a qualsiasi applicazione. Per gli sviluppatori, OpenWrt è il framework per creare un'applicazione senza dover costruire attorno ad essa un firmware completo; per gli utenti questo significa la possibilità di personalizzazione completa, di utilizzare il dispositivo in modi mai immaginati.
Descrizione
- Questo file può essere utilizzato solo quando il router funziona con l'interfaccia utente web di Cudy.
- Se il router funziona già con l'interfaccia utente OpenWRT, l'utente deve prima ripristinarlo sul firmware ufficiale Cudy. E poi aggiorna il router con questo firmware.
- Come ripristinare il router sul firmware ufficiale Cudy? Si prega di leggere il file Leggimi nel file scaricato.
Garanzia:
Cudy dichiara
- Noi, Cudy, non ci assumiamo alcuna garanzia per alcun software che non sia rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Non assumiamo alcuna garanzia per i prodotti che hanno installato software non rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Se hai bisogno di utilizzare il software openwrt, ti suggeriamo di scaricarlo dal sito Web ufficiale di Cudy.
Scarica il firmware OpenWrt per rimuovere il controllo della firma: Drive
Ricerca firmware OpenWrt (non rilasciato da Cudy): Selettore firmware OpenWrt
1466 commenti
Hello. I have a WR3000S v.1 router (S/N S0007084261201121). I initially installed the transitional firmware `cudy_wr3000s-v1-sysupgrade_20251119.bin` from your website. Currently, I have `openwrt-25.12.5-mediatek-filogic-cudy_wr3000s-v1-squashfs-sysupgrade.bin` installed, with 44 MB of available flash memory. Can I switch to the `openwrt-25.12.5-mediatek-filogic-cudy_wr3000s-v1-ubootmod-squashfs-sysupgrade.itb` firmware to get 90+ MB of memory without risking damage to the router?
Thanks in advance.
Hello Cudy Support,
I have a Cudy WR3000H V1.0.
Serial number: S001004261804085 EU1.0
Current stock firmware: 2.4.5-20250515-105059
I would like to install official OpenWrt. Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000H V1.0.
Thank you!
@Dear Gaetano,
Our technical support has sent you the firmware via email. Please check.
“I have a WR3000 EU 1.0 with s/n: WR3000253209334.
Please can i get the Cudy-signed intermediate firmware in email?”
@Dear Leo,
Our technical support has sent you the firmware via email. Please check.
“Hello,
This is my second attempt to reach you. I wrote to support@cudy.com on 22 May 2026 and never received a reply. I have sent another email today, and I am also posting here since I can see you answer requests in these comments.
Model: WR3000 V1.0
Serial number: WR3000255303583
Current stock firmware: 2.4.19-20250828-192837
Please send me by email the correct Cudy-signed OpenWrt intermediate firmware for this exact unit, and please confirm whether it uses the new F50L1G41LC flash chip or the old one.
I am asking because my SN starts with 2553, which by your own explanation means week 53 of 2025 — later than the 2543 cutoff from your notice of 24 November 2025. However, WR3000 1.0 is not listed among the affected models in that notice, so I do not want to guess which image to use.
Thank you very much."
@Dear JW,
Our technical support has sent you the firmware via email. Please check.
“Hello.
I have a Cudy WR3000 V1.0 router.
Serial number starts with: 2452
Firmware: 2.4.5 DE
I would like to install official OpenWrt. I have tried installing the official Cudy “signed” OpenWRT from the google drive link but every time it bricks the router and I have to reflash from TFTP.
Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000 V1.0 and this hardware/flash revision.
Thank you."