1. Scarica il firmware più recente dal Centro download.
2. Decomprimi il file scaricato
3. Accendi il dispositivo Cudy, attendi che il LED diventi fisso.
4. Connettiti alla rete di Cudy tramite WiFi o Ethernet.
5. Apri un browser web e vai su http://cudy.net o http://192.168.10.1 .
Per i dettagli, fare riferimento a Come accedere all'interfaccia web di Cudy Router?
6. Aggiorna il firmware.
a. Impostazioni avanzate -> Firmware, scegli il firmware che hai decompresso per caricare.
b. La pagina Impostazioni generali->Firmware può eseguire l'aggiornamento online e l'aggiornamento locale.
Nota: è supportato solo il firmware 2.x.x o successivo.
7. Attendere 5 minuti per il riavvio del router.
181 commenti
@Estimado Snheider:
Intente cambiar el navegador web para actualizar el router. Le sugiero que utilice Chrome o Edge.
Si sigue sin funcionar, pruebe con otro ordenador.
“Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba”
Firmware EU 1.0 (Official .bin)
Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba
@Dear Sakis,
Please try to change the web browser to update the router. I suggest the chrome or edge.
If still fail, please try to change a computer.
“It is impossible to update the Cudy WR1500 that I bought.
I follow the instructions exactly. I am sure that I am not doing anything wrong.
I try to install the intermediate—L101-1.0.4-20241205-747393-mid-flash.bin first, it tells me that the installation is successful, I wait 3 minutes and then… the led flashes once blue and once red.
I turn off the power, turn it back on after a minute, it works again but the intermediate update is not installed so it does not recognize the latest update 2.3.10”
It is impossible to update the Cudy WR1500 that I bought.
I follow the instructions exactly. I am sure that I am not doing anything wrong.
I try to install the intermediate—L101-1.0.4-20241205-747393-mid-flash.bin first, it tells me that the installation is successful, I wait 3 minutes and then… the led flashes once blue and once red.
I turn off the power, turn it back on after a minute, it works again but the intermediate update is not installed so it does not recognize the latest update 2.3.10