1. Scarica e decomprimi il file da qui.
2. Scarica il firmware più recente da sito ufficiale e rinominarlo in "recovery.bin".
3. Spegni il router. Scollega l'alimentatore o premi il pulsante POWER.
4. Collega il tuo computer alla porta LAN del router con un cavo Ethernet.
5. Configura manualmente l'indirizzo IP del tuo computer su "192.168.1.88".
6. Esegui "tftp32.exe".
7. Esegui "netsh advfirewall set allprofiles state off" nella riga di comando per disabilitare il firewall di Windows, altrimenti tftp verrà bloccato.
8. Premi il pulsante/foro "Reset" e tienilo premuto. Prima di accendere il router e prima che tftp inizi a scaricare il firmware, non rilasciare il pulsante/foro "Reset".
9. Accendere il router.
10. Quando tutte le luci lampeggiano velocemente o quando tftp inizia a scaricare il firmware, puoi rilasciare il pulsante/foro "Reset".
11. Quando la luce lampeggia lentamente, l'aggiornamento è completo.
12. Ripristina l'indirizzo IP del tuo computer in modo che sia un IP dinamico.
13. Fatto.
249 commenti
@Dear Dany,
This is the correct article for recovering the router. You must connect the LAN port of the router to the computer when recovering. If you follow all the steps, but still don’t work. The uboot of the router may have been changed. Or the router is faulty. If you still can login to the web page of the router, you must change the uboot to Cudy official uboot first.
“Hello,
I am trying to reset and recover my Cudy TR30 router using TFTP64, but it does not work correctly.
When I connect the power and hold the RESET button, TFTP64 automatically switches the server interface to “Software Loopback Interface 1”. After that, nothing happens and the router does not start the recovery or firmware upload process.
I already tried:
Holding the RESET button before powering on Using different Ethernet ports Changing network adapter settings Setting a static IP address on my PC
However, the router still does not enter proper recovery mode.
Could you please help me understand:
1. How to correctly enter recovery/TFTP mode on the TR30
2. Which LAN port should be used
3. What IP settings are required
4. Whether this behavior indicates a hardware issue
Thank you."
Hello,
I am trying to reset and recover my Cudy TR30 router using TFTP64, but it does not work correctly.
When I connect the power and hold the RESET button, TFTP64 automatically switches the server interface to “Software Loopback Interface 1”. After that, nothing happens and the router does not start the recovery or firmware upload process.
I already tried:
Holding the RESET button before powering on Using different Ethernet ports Changing network adapter settings Setting a static IP address on my PCHowever, the router still does not enter proper recovery mode.
Could you please help me understand:
1. How to correctly enter recovery/TFTP mode on the TR30
2. Which LAN port should be used
3. What IP settings are required
4. Whether this behavior indicates a hardware issue
Thank you.
@Уважаемый Макс,
Если у вас не получается, попробуйте обратиться за помощью к кому-нибудь еще.
“Модель WR3000E , решил обновить openwrt до последний версии, роутер ушёл в циклическую перезагрузку , мигают все индикаторы. При зажатии reset , загорается следующий за индикатором питания и мигает примерно раз в секунду, по инструкции сделать не получилось.”
Модель WR3000E , решил обновить openwrt до последний версии, роутер ушёл в циклическую перезагрузку , мигают все индикаторы. При зажатии reset , загорается следующий за индикатором питания и мигает примерно раз в секунду, по инструкции сделать не получилось.
@Уважаемый Алексей,
Спасибо за ваш отзыв.
“После некорректных настроек отвалился роутер WR3000P в openwrt. Инструкция очень помогла вернуть в заводские настройки!”