1. Scarica e decomprimi il file da qui.
2. Scarica il firmware più recente da sito ufficiale e rinominarlo in "recovery.bin".
3. Spegni il router. Scollega l'alimentatore o premi il pulsante POWER.
4. Collega il tuo computer alla porta LAN del router con un cavo Ethernet.
5. Configura manualmente l'indirizzo IP del tuo computer su "192.168.1.88".
6. Esegui "tftp32.exe".
7. Esegui "netsh advfirewall set allprofiles state off" nella riga di comando per disabilitare il firewall di Windows, altrimenti tftp verrà bloccato.
8. Premi il pulsante/foro "Reset" e tienilo premuto. Prima di accendere il router e prima che tftp inizi a scaricare il firmware, non rilasciare il pulsante/foro "Reset".
9. Accendere il router.
10. Quando tutte le luci lampeggiano velocemente o quando tftp inizia a scaricare il firmware, puoi rilasciare il pulsante/foro "Reset".
11. Quando la luce lampeggia lentamente, l'aggiornamento è completo.
12. Ripristina l'indirizzo IP del tuo computer in modo che sia un IP dinamico.
13. Fatto.
162 commenti
@Уважаемый Владм!
Пожалуйста, следуйте этой инструкции, чтобы восстановить заводскую прошивку Cudy WR300.
Для чего нужен пароль?
“Как прошить обратно cudy wr300 на заводскую прошивку?
Пишите где ввод пароля (неверная информация)”
@Dear kozian,
For TR1200, there is a difference. You must connect your computer to WAN port of TR1200 when recovering. For TR3000, you must connect your computer to LAN port of TR1200 when recovering. Please have a check.
“@Support
>> Did you change the uboot when you update the OpenWrt firmware?
No, i did not.
I was able to restore TR3000 using another mac. I used external ethernet dongle and it seems it took to long to bring interface up. Mac mini with internal ethernet did the job fine.
With TR1200 that was not an issue btw! Perhaps due to it’s lower cpu and longer time to boot."
Как прошить обратно cudy wr300 на заводскую прошивку?
Пишите где ввод пароля (неверная информация)
@Support
>> Did you change the uboot when you update the OpenWrt firmware?
No, i did not.
I was able to restore TR3000 using another mac. I used external ethernet dongle and it seems it took to long to bring interface up. Mac mini with internal ethernet did the job fine.
With TR1200 that was not an issue btw! Perhaps due to it’s lower cpu and longer time to boot.
@Dear kozian,
Did you change the uboot when you update the OpenWrt firmware? Please tell me the steps when you update the OpenWrt firmware.
“Trying to restore official firmware on TR3000 V1 (after OpenWRT). Router does not connect to tftp server. `tcpdump arp` shows no requests from router either. Used 192.168.1.88 / 192.168.1.2 / 192.168.10.88 IP for server, Lan port. LED blinks red-white.
Need help.”