1. Scarica e decomprimi il file da qui.
2. Scarica il firmware più recente da sito ufficiale e rinominarlo in "recovery.bin".
3. Spegni il router. Scollega l'alimentatore o premi il pulsante POWER.
4. Collega il tuo computer alla porta LAN del router con un cavo Ethernet.
5. Configura manualmente l'indirizzo IP del tuo computer su "192.168.1.88".
6. Esegui "tftp32.exe".
7. Esegui "netsh advfirewall set allprofiles state off" nella riga di comando per disabilitare il firewall di Windows, altrimenti tftp verrà bloccato.
8. Premi il pulsante/foro "Reset" e tienilo premuto. Prima di accendere il router e prima che tftp inizi a scaricare il firmware, non rilasciare il pulsante/foro "Reset".
9. Accendere il router.
10. Quando tutte le luci lampeggiano velocemente o quando tftp inizia a scaricare il firmware, puoi rilasciare il pulsante/foro "Reset".
11. Quando la luce lampeggia lentamente, l'aggiornamento è completo.
12. Ripristina l'indirizzo IP del tuo computer in modo che sia un IP dinamico.
13. Fatto.
242 commenti
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.
“Greetings, I possess a Cudy X6 V2 router operating on OpenWrt, and I wish to revert to the official Cudy firmware. I followed your instructions to return to Cudy’s firmware, i.e. to go from OpenWRT Firmware back to Cudy’s Official Firmware. After i flashed successfully with tftp32 the newest official firmware for the cudy x6 v2 (x6v2-R30-2.1.0-20240411-114110), I get “invalid board info” error at the device login page (192.168.10.1 or cudy.net) where one needs to create a new admin password. The website-header also reads a strange “lede” title. What does the “Invalid board info!” error mean and how can it be fixed? kind regards!”
Greetings, I possess a Cudy X6 V2 router operating on OpenWrt, and I wish to revert to the official Cudy firmware. I followed your instructions to return to Cudy’s firmware, i.e. to go from OpenWRT Firmware back to Cudy’s Official Firmware. After i flashed successfully with tftp32 the newest official firmware for the cudy x6 v2 (x6v2-R30-2.1.0-20240411-114110), I get “invalid board info” error at the device login page (192.168.10.1 or cudy.net) where one needs to create a new admin password. The website-header also reads a strange “lede” title. What does the “Invalid board info!” error mean and how can it be fixed? kind regards!
@Ahmad,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.
“Please, contact me. I did all the steps and was unable to repair my Cudy wr1300. It’s seems that the firmware was successfully installed on the router but this did not change anything. I still have not gotten an IP address”
Please, contact me. I did all the steps and was unable to repair my Cudy wr1300. It’s seems that the firmware was successfully installed on the router but this did not change anything. I still have not gotten an IP address
Hi. Unfortunately, I didn’t find any email.