1. Scarica e decomprimi il file da qui.
2. Scarica il firmware più recente da sito ufficiale e rinominarlo in "recovery.bin".
3. Spegni il router. Scollega l'alimentatore o premi il pulsante POWER.
4. Collega il tuo computer alla porta LAN del router con un cavo Ethernet.
5. Configura manualmente l'indirizzo IP del tuo computer su "192.168.1.88".
6. Esegui "tftp32.exe".
7. Esegui "netsh advfirewall set allprofiles state off" nella riga di comando per disabilitare il firewall di Windows, altrimenti tftp verrà bloccato.
8. Premi il pulsante/foro "Reset" e tienilo premuto. Prima di accendere il router e prima che tftp inizi a scaricare il firmware, non rilasciare il pulsante/foro "Reset".
9. Accendere il router.
10. Quando tutte le luci lampeggiano velocemente o quando tftp inizia a scaricare il firmware, puoi rilasciare il pulsante/foro "Reset".
11. Quando la luce lampeggia lentamente, l'aggiornamento è completo.
12. Ripristina l'indirizzo IP del tuo computer in modo che sia un IP dinamico.
13. Fatto.
249 commenti
@Dear Hans,
Sorry, we don’t offer this help as you said.
“Dear Cudy Support,
I’m working with the WR11000 (model R65) and would like to request a signed firmware based on version 2.2.16 DE, with SSH access enabled by default. This is for development and testing purposes only, and I fully accept any associated risks.
Could you provide such a firmware or let me know if it’s possible?
Thank you for your support.”
Dear Cudy Support,
I’m working with the WR11000 (model R65) and would like to request a signed firmware based on version 2.2.16 DE, with SSH access enabled by default. This is for development and testing purposes only, and I fully accept any associated risks.
Could you provide such a firmware or let me know if it’s possible?
Thank you for your support.
Dear Angel,
Yes, you can do it. Please follow the steps on this instruction to do it.
“Hello recently i buy tr1200 us v.1 and flashed with the Intermediate Firmware can i flash back to official i see from comments below that it must be connected on the WAN Port?”
Nevermind i found it!It was the wan port ! 1.Download tftp64.exe extract it put the firmware of the TR1200 renamed recovery in to the same extracted folder open the program don’t mess anything interface leave it close fw if you have windows press the reset button and hold it put the power and when the light starts flash quick leave it the program will send it u don’t have to look at the program look at led light of cudy TR1200.
Hello recently i buy tr1200 us v.1 and flashed with the Intermediate Firmware can i flash back to official i see from comments below that it must be connected on the WAN Port?