1. Scarica e decomprimi il file da qui.
2. Scarica il firmware più recente da sito ufficiale e rinominarlo in "recovery.bin".
3. Spegni il router. Scollega l'alimentatore o premi il pulsante POWER.
4. Collega il tuo computer alla porta LAN del router con un cavo Ethernet.
5. Configura manualmente l'indirizzo IP del tuo computer su "192.168.1.88".
6. Esegui "tftp32.exe".
7. Esegui "netsh advfirewall set allprofiles state off" nella riga di comando per disabilitare il firewall di Windows, altrimenti tftp verrà bloccato.
8. Premi il pulsante/foro "Reset" e tienilo premuto. Prima di accendere il router e prima che tftp inizi a scaricare il firmware, non rilasciare il pulsante/foro "Reset".
9. Accendere il router.
10. Quando tutte le luci lampeggiano velocemente o quando tftp inizia a scaricare il firmware, puoi rilasciare il pulsante/foro "Reset".
11. Quando la luce lampeggia lentamente, l'aggiornamento è completo.
12. Ripristina l'indirizzo IP del tuo computer in modo che sia un IP dinamico.
13. Fatto.
249 commenti
@Dear Will,
OK. We have add a note in this article.
“That worked! Thank you for your help. It would be great if you could mention this in the steps or add a search option to the support section. I really appreciate your help and your prompt response.”
That worked! Thank you for your help. It would be great if you could mention this in the steps or add a search option to the support section. I really appreciate your help and your prompt response.
@Dear Will,
TR1200 is different with other models. You must connect your computer to the WAN port of TR1200 when recovering. Please have a try.
“Hi, I tried all the steps above, but my TR1200 still isn’t being detected by TFTP. I tested on both Windows and Mac (using native TFTP), and also tried PuTTY to check for any serial logs, but didn’t see anything. Can you help please?”
Hi, I tried all the steps above, but my TR1200 still isn’t being detected by TFTP. I tested on both Windows and Mac (using native TFTP), and also tried PuTTY to check for any serial logs, but didn’t see anything. Can you help please?
@Dear spartak,
Please check the steps carefully one by one and try again.
“Cudy X6 (AX1800) v2
how to return to official firmware from OpenWRT?
From local 192.168.1.88 not download firmware”