Che cos'è la modalità punto di accesso?
La modalità Access Point indica che il router utilizza una connessione cablata al router principale o al modem router per espandere la copertura wireless per una rete domestica .
Topologia di rete comune:
Passaggio 1: apri un browser web e vai su http://cudy.net o http://192.168.10.1.
Per i dettagli, fare riferimento a Come accedere all'interfaccia web di Cudy Router?
Passaggio 2: verrà visualizzata la finestra Configurazione rapida, scegli "Punto di accesso wireless", quindi fai clic su "Avanti" .
Passaggio 3: scegli il tuo "fuso orario".
Passaggio 4: conferma la connessione hardware.
Passaggio 5: cambia il nome e la password della rete wireless.
Passaggio 6: fai clic su "Salva e applica" per completare la configurazione.
Passaggio 7: attendi qualche secondo per il riavvio del sistema, quando viene nuovamente visualizzata la pagina di accesso, puoi goderti Internet.
Nota:
Dopo aver configurato il router Cudy in modalità Access Point, l'indirizzo IP verrà assegnato dal router host e l'indirizzo IP predefinito 192.168.10.1 non sarà in grado di accedere. Se è necessario accedere al router Cudy di nuovo, digita 'http://cudy.net' nel tuo browser o cerca l'indirizzo IP del router Cudy nel client del router principale (primario) elenco.
44 commenti
@Dear Marian,
Thank you for your kindly advice! We will provide your feedback to the product department for evaluation.
“Add vlan support for the routers. Or give ssh access so the users can create their own VLANs. Dont limit the usage of the routers”
Add vlan support for the routers. Or give ssh access so the users can create their own VLANs. Dont limit the usage of the routers
@Dear naz,
Yes, the LAN ports are still work. You can connect the devices to the LAN ports to share the network.
For WR3000, the main difference is that it uses the 16MB Flash. Other routers use 128MB Flash. Then WR3000 has to delete some functions, such as IPSec VPN, DNS over TLS, Zerotoer VPN etc. Other routers support all of these functions.
“Hi
If i setup a Cudy Wr3000s/e/h/p (one of them) in wifi ap mode, im i still able to use the ethernet ports to connect to desktops / other clients?
can you also let me know the differences between the s/e/h/p models of wr3000?
thanks.”
Hi
If i setup a Cudy Wr3000s/e/h/p (one of them) in wifi ap mode, im i still able to use the ethernet ports to connect to desktops / other clients?
can you also let me know the differences between the s/e/h/p models of wr3000?
thanks.
@Dear Mike,
Please follow the steps:
1. Please update the latest firmware 2.4.5 for AP1300. You can download the firmware on the website.
https://www.cudy.com/pages/download-center/ap1300-1-0
2. Please reset all the three AP1300 that you want to work as the submesh AP. Setup the Wi-Fi settings of the main mesh AP1300.
3. Install them in the same network (in the same management VLAN). The mesh system will be installed automatically.
4. Please test and check if the network in working normally, as you want.
“Hello Cudy Hardware & Software Developer’s team!)
I have 4 (four) Cudy AP1300. For my business project, I need build MESH with multi SSID via many VLAN’s:
SSID1 – VLAN10 – 192.168.10.0/24 – CORP-WIFI
SSID2 – VLAN20 – GUEST-WIFI
192.168.20.0/24
ETH1 trunk-mode (include VLAN10-VLAN20-VLAN30) – VLAN30 – 192.168.30.0/24 – MGMT & mesh connector.
How I do it?
All switches in my company support vlans”