Topologia di rete comune:
< span data-mce-fragment="1"><
Passaggio 1: Collega il range extender alla presa a muro e attendi finché la spia di alimentazione non diventa stabile.
Nota:
1. Quando configuri il Range Extender, avvicinalo al tuo router host.
2. RESET Range Extender alle impostazioni predefinite per evitare le interfacce.
Passaggio 2: connettiti alla rete Wi predefinita del Range Extender -Fi che è Wi-Fi aperto.
Passaggio 3: avvia un browser web e inserisci http://cudyre.net/ o http://192.168.10.254/ nella barra degli indirizzi.
Verrà visualizzata la pagina di accesso di seguito. Scegli la lingua di visualizzazione della pagina di gestione web e la password richiesta è "admin" oppure devi creare una password.
Passaggio 4: Verrà visualizzata la finestra di configurazione rapida, scegli "Wireless Extender", quindi vai a "Avanti'.
< /p>
Passaggio 5: scegli il tuo "Fuso orario".
< /p>
Passaggio 6: seleziona la rete host che desideri estendere. Fai clic su 'Connetti.
< imm src="https://cdn.shopify.com/s/files/1/0673/4748/0820/files/EX8_480x480.png?v=1712026446" style="float: none;" data-mce-fragment="1" data-mce-src="https://cdn.shopify.com/s/files/1/0673/4748/0820/files/EX8_480x480.png?v=1712026446"> < /p>
Passaggio 7: inserisci la password wireless del router host.
< /p>
Nota: assicurati che la password wireless digitata è corretto, altrimenti la configurazione non potrà avere successo.
Passaggio 8: personalizza il nome WiFi (SSID) e la password sia la stessa della rete host.
Passaggio 9: fai clic su 'Salva & Applica' per completare la configurazione.
< /p>
Passaggio 10: riconnetti i dispositivi wireless al nuovo Rete Wi-Fi.
Nota:
Dopo la configurazione l'indirizzo IP assegnato non sarà 192.168.10.254. Per accedere nuovamente a Cudy Extender, visita "http://cudyre.net" o trova l'indirizzo IP nell'elenco dei client del router.
13 commenti
My exteneder just flash light and then turns off and dose not show the word mange router as usual and when i link it to the router the lock light is the only bright light
@Dear George,
Please try to enable the “MAC Repeater” function on the “Advanced Settings” page. Then check if the problem remains?
If yes, you can also try to set it to WISP mode.
“Hello, I have the AP1300 outdoors and I am using it as an extender. Although I set it up successfully and I can connect with very good speeds after a few hours all my devices are disconnected and cannot obtain IP. My router IP is 192.168.2.1. My provider tried to make some settings, even try a static ip with with range but again after a few hours all devices are disconnected. Is the repeater IP the same as my router’s? In the cudy app it notes that my IP is 192.168.10.254. My service provider says that this might be the problem. Please help me to solve this, when the devices works it really works great. Thank you in advance, George”
Hello, I have the AP1300 outdoors and I am using it as an extender. Although I set it up successfully and I can connect with very good speeds after a few hours all my devices are disconnected and cannot obtain IP. My router IP is 192.168.2.1. My provider tried to make some settings, even try a static ip with with range but again after a few hours all devices are disconnected. Is the repeater IP the same as my router’s? In the cudy app it notes that my IP is 192.168.10.254. My service provider says that this might be the problem. Please help me to solve this, when the devices works it really works great. Thank you in advance, George
@Claudia,
You can try to reset the device to factory default and set it up again. If the device is faulty, such as the LED will not power on. I suggest you to contact the seller to request a warranty.
“Hi
My extender just stopped working”
Hi
My extender just stopped working