Preparation:
1. Install the antennas and position them upwards.
2. Insert the SIM card into the slot until you hear a click.
3. Connect the power adapter to the router and power it on.
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1. Input the administrator password to log in.
Note: The default administrator password is "admin" if the firmware version is 1.X.X. We have removed the default administrator password since the firmware version 2.X.X. You must create the administrator password when first log in.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: The Quick Setup window will pop up, select your 'Time Zone'.
Step 3: Configure the APN parameters. Most of the time we only just need keep APN Profile as " Auto". Then click "Next". The router will choose the APN parameters automatically. (Recommend)
If you want to customize the APN parameters. You can choose APN Profile as " Manual", and input the correct APN parameters.
Note: If you are not sure about the APN parameters, please contact your Internet Service Provider.
Step 4: Set the wireless network name and password or keep them as default.
Step 5: Click "Save & Apply" to complete the configuration.
Step 6: When the Status is Connected, you can enjoy the internet.
34 comments
Dear Cudy team. How should I configure your router lt500D to be able to connect two CCTV cameras via Ethernet cable? I was able to connect only one that supports wifi, second one can be connected only via cable. Your router does not see these devices in lan network.
@Dear Amigos,
The AT command for checking EARFCN is AT+QENG=“servingcell” , You can also check it in the syslog. For example
AT+QENG=“servingcell” → AT+QENG=“servingcell” +QENG: “servingcell”,“NOCONN”,“LTE”,“FDD”,250,01,41720C,9,1802,3,5,5,454C,-89,-10,-59,14,35 OK
The “1802” is the EARFCN.
For cell ID, we don’t have plan to change the format.
“Hi! In first iam need to say thanks for very balanced products with Cudy brand. Anyway i have some question about Cudy LT400 Outdoor functions.
1 – in Status we have data about LTE connection as MCC MNC CID and PCID, but not EARFCN and not eNodeB ID. How i can get it? Modem have this data by cell.
2- Cell ID have hex format. possible convert it in dec format Base ID?
and very important
need AT commands LIST for internal modem.
Thanks!"
Hi! In first iam need to say thanks for very balanced products with Cudy brand. Anyway i have some question about Cudy LT400 Outdoor functions.
1 – in Status we have data about LTE connection as MCC MNC CID and PCID, but not EARFCN and not eNodeB ID. How i can get it? Modem have this data by cell.
2- Cell ID have hex format. possible convert it in dec format Base ID?
and very important
need AT commands LIST for internal modem.
Thanks!
Dear Stanley, Please contact samcudy.com.
“Looks as if I’m having problems sending you photos please give details address for you to receive my photos and video thank you.”
Looks as if I’m having problems sending you photos please give details address for you to receive my photos and video thank you.