工業交換機

IG1008EPS2

商品詳情
概覽與圖片
參數
下載

Survives Heat, Cold, Surge, and ESD

Built with a industrial-grade design and components, the device achieves Level 4 EMC to withstand surge and ESD from power and Ethernet ports. The industrial-grade ICs, together with extra heatsink design, allow stable operation in extreme temperatures and ensures long-term durability.

Survives Heat, Cold, Surge, and ESD

Built with a industrial-grade design and components, the device achieves Level 4 EMC to withstand surge and ESD from power and Ethernet ports. The industrial-grade ICs, together with extra heatsink design, allow stable operation in extreme temperatures and ensures long-term durability.

Electrical & Physical Robustness

Dual DC Inputs. 44-57V Voltage Range.

The switch supports dual DC inputs (44–57V) for extra redundant protection. It also includes reverse-polarity and short-circuit protection to ensure stable operation in complex power environments.

Rugged Casing. Reinforced Construction.

The wave-like heatsink not only improves heat dissipation but also enhances structural rigidity. Internally, the PCB and components are reinforced with extra mounting points for anti-vibration supports.

DIP Switches for Flexible Deployment

Web Management for Complete Control

Manage everything through the web panel. When web management is enabled, the switch ignores the other three DIP switches, while all related features remain configurable in the web.

VLAN Isolates Downlink Ports for Improved Safety

Turn on the VLAN mode to prevent client-side hacking, preventing sensitive data from leaking. The downlink clients will only be able to communicate with the uplink devices.

Suppress Broadcast Storm

Protect the network's bandwidth from abnormal broadcast activities such
as ARP attack. Once the broadcast packets flood from a port, the port
will be automatically shut down.

PoE Auto-Recovery

Activate the Watchdog mode to monitor port activity. If a connected device freezes and stops transmitting data for 5 minutes, the Watchdog will automatically reboot the corresponding PoE port.

1 2

8-Port Gigabit Industrial Easy-Managed PoE+ Switch with 2 SFP

8-Port Gigabit Industrial Easy-Managed PoE+ Switch with 2 SFP, IG1008EPS2 1.0

IG1008EPS2 1.0

產品子類

A 8-GbE 2-SFP industrial PoE+ switch with management feature for networking in harsh conditions such as manufacturing, transportation, maritime, oil & gas, and mining.

8× GbE, Shielded, ±6kV Surge Resistant
8× 802.3at/af Mode A PoE
2×SFP
Dual DC Inputs, Requires 44~57V Power
IP40, -40~75°C (-40~167°F)
Polarity Reverse Protection
Short Circuit Protection
Broadcast Storm Prevention On/Off
VLAN/BSP/Watchdog On/Off
Integrated DIN-Rail Bracket

查看完整資訊

型號版本
型號版本	IG1008EPS2 1.0
接口
接口	1.25G SFP 插槽（个）	2
	千兆 RJ45 网口（个）	8
	千兆 PoE RJ45 网口位置	#1~#8
	PoE 单口最大功率	30W
	PoE 网口备注	PoE 网口支持 IEEE 802.3at/af 标准.
	VLAN模式网口	#1~#8 by default, configurable when the Web mode is activated
	电源口	4-Pin 供电端子
按钮和指示灯
按钮和指示灯	LED 指示灯	电源 1 电源 2 网口连接/活动状态 PoE 网口供电状态
	按钮	重置按钮 Web On/Off VLAN 模式开关广播风暴抑制开关看门狗开关
	按钮功能备注	When Web On/Off is enabled, the other On/Off toggles will be ignored by the system.
性能
性能	网线传输距离和速率	Cat. 3 或更高级别网线: 100米传输距离，速率 10Mbps Cat. 5 或更高级别网线: 100米传输距离，速率 100Mbps Cat. 5e 或更高级别网线: 100米传输距离，速率 Gigabit
	MAC 地址表	4096
	最大交换容量	21Gbps
	最大包转发率	14.88Mpps
	巨型帧	16KB
	数据包缓冲区	1.5Mbit
电源
电源	受电方式	直流
	冗余	双冗余
	电源输入	44-57V⎓
	最大功耗	240W
	最大功耗（不含PoE）	TBD
	待机功耗	TBD
交换性能
交换性能	802.3 协议	802.3x Flow Control 802.3i 10BASE-T 802.3u 100BASE-TX 802.3ab 1000BASE-T 802.3z 1000BASE-X 802.3az Power Saving
	802.1 协议	802.1p: LAN Layer 2 QoS/CoS 802.1q: VLAN Bridge Operation 802.1ab: LLDP/LLDP-MED
	端口管理	端口开关端口协商速率端口聚合（静态）端口镜像速率限制巨型帧设置风暴控制流量监控 MAC地址管理节能以太网 (802.3az)
	端口聚合组数量	4
	单聚合组内端口（个）	8
	L2层管理功能	IGMP 侦听环路预防 DHCP 侦听 LLDP 配置及邻居 MTU VLAN 基于端口的 VLAN 802.1Q VLAN DSCP QoS 802.1p QoS 基于端口的 QoS
可靠性
可靠性	接地方式	接地螺丝
	安全性	IEC/EN 62368
	EMC 电磁兼容性	EN55032 Class A EN55035 Class A
	EMI 电磁干扰控制标准	FCC 47 CFR Part 15B Class A
	EMS 电磁抗扰性能	IEC/EN 61000-4-2, Level 4 ESD: Contact: 8kV; Air: 15kV IEC/EN 61000-4-3, Level 4 RS: 80 MHz to 1 GHz: 30 V/m IEC/EN 61000-4-4, Level 4 EFT: Power: 2kV; RJ45: 4kV IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 6kV IEC/EN 61000-4-6, Level 3 CS: 10V IEC/EN 61000-4-8, Level 5 PFMF IEC/EN 61000-4-9, Level 5 PMF IEC/EN 61000-4-10, Level 5 DOMF
	EMS 备注	本产品在 IEC/EN 标准中定义的每个抗干扰分支下超过其定义的最高级别标准。
	耐震动	IEC 60068-2-6
	耐冲击	IEC 60068-2-27
	耐自由跌落	IEC 60068-2-32
	运行环境	运行环境温度: -40 ℃ ~ 75 ℃ 储存温度: -40 ℃ ~ 85 ℃ 运行湿度: 5% ~ 95% 非凝结储存湿度: 5% ~ 95% 非凝结
系统
系统	管理方式	Web 网页管理
	固件升级	本地升级
	配置备份	备份与恢复
	诊断工具	网线状态/长度诊断 Ping
尺寸与重量
尺寸与重量	尺寸	主体: 47.5×103×144 mm 安装所需空间: 47.5×147×165 mm
材质与安装
材质与安装	机身材质	铝合金
	IP 等级	IP40
	安装方式	导轨安装
包装清单
包装清单	IG1008EPS2 安装手册
订购信息
订购信息	零售包装尺寸	207×154×75mm
	外箱尺寸	43.9×40.5×33.1 cm