工業交換機
IG1005ES1

Survives Heat, Cold, Surge, and ESD

Built with a industrial-grade design and components, the device achieves Level 4 EMC to withstand surge and ESD from power and Ethernet ports. The industrial-grade ICs, together with extra heatsink design, allow stable operation in extreme temperatures and ensures long-term durability.

Survives Heat, Cold, Surge, and ESD

Built with a industrial-grade design and components, the device achieves Level 4 EMC to withstand surge and ESD from power and Ethernet ports. The industrial-grade ICs, together with extra heatsink design, allow stable operation in extreme temperatures and ensures long-term durability.

Electrical & Physical Robustness

Dual DC Inputs. 9.6-60V Voltage Range.

The switch supports dual DC inputs (9.6–60V) for extra redundant protection. It also includes reverse-polarity and short-circuit protection to ensure stable operation in complex power environments.

Rugged Casing. Reinforced Construction.

The wave-like heatsink not only improves heat dissipation but also enhances structural rigidity. Internally, the PCB and components are reinforced with extra mounting points for anti-vibration supports.

DIP Switches for Flexible Deployment

Web Management for Complete Control

Manage everything through the web panel. When web management is enabled, the switch ignores the other three DIP switches, while all related features remain configurable in the web.

VLAN Isolates Downlink Ports for Improved Safety

Turn on the VLAN mode to prevent client-side hacking, preventing sensitive data from leaking. The downlink clients will only be able to communicate with the uplink devices.

Broadcast Strom Prevention

Keeps the network stable and responsive, reducing downtime caused by misconfigured devices or abnormal traffic.

Extend for 250 m Transmission

For long-distance networking, enable the Extend mode to connect clients
up to 250 meters away by limiting the port speed to 10 Mbps.

L2 Management Features

802.1Q/Port/MTU VLAN

Separate devices into dedicated business VLANs to improve security and network efficiency.

Port Mirroring

Mirror traffic from selected ports to a monitoring port for traffic analysis and troubleshooting.

802.1p/DSCP/Port QoS

Allows you to create rules that prioritize the most latency-sensitive traffic, such as production control commands.

Loop Detection/Prevention

Automatically detects network loops, indicates affected ports with blinking LEDs, and blocks the loop.

1 2

5 埠千兆工業光管理交換機，附 1 台 SFP

5 埠千兆工業光管理交換機，附 1 台 SFP, IG1005ES1 1.0

IG1005ES1 1.0

A 5-GbE, 1-SFP industrial switch with management features for networking in harsh conditions such as manufacturing, transportation, maritime, oil & gas, and mining.

  • 5× GbE, Shielded, ±6kV Surge Resistant
  • 1× 1.25G SFP
  • IP40, -40~75°C (-40~167°F)
  • Dual DC Inputs, Requires 9.6~60V Power
  • Polarity Reverse Protection
  • Short Circuit Protection
  • Broadcast Storm Prevention On/Off
  • VLAN On/Off
  • Integrated DIN-Rail Bracket
查看完整資訊
型號版本
型號版本 IG1005ES1 1.0
接口
接口 1.25G SFP 插槽（个） 1
千兆 RJ45 网口（个） 5
VLAN模式网口 #1~#4 by default, configurable when the Web mode is activated
电源口 4-Pin 供电端子
按钮和指示灯
按钮和指示灯 LED 指示灯
  • 电源 1
  • 电源 2
  • 网口连接/活动状态
按钮
  • 重置按钮
  • Web On/Off
  • VLAN 模式开关
  • 广播风暴抑制开关
按钮功能备注 When Web On/Off is enabled, the other On/Off toggles will be ignored by the system.
性能
性能 网线传输距离和速率
  • Cat. 3 或更高级别网线: 100米传输距离，速率 10Mbps
  • Cat. 5 或更高级别网线: 100米传输距离，速率 100Mbps
  • Cat. 5e 或更高级别网线: 100米传输距离，速率 Gigabit
MAC 地址表 2048
最大交换容量 12.5Gbps
最大包转发率 8.929Mpps
巨型帧 15KB
数据包缓冲区 1Mbit
电源
电源 受电方式 直流
冗余 双冗余
电源输入 9.6-60V⎓
最大功耗 3.1W
待机功耗 0.64W
交换性能
交换性能 802.3 协议
  • 802.3x Flow Control
  • 802.3i 10BASE-T
  • 802.3u 100BASE-TX
  • 802.3ab 1000BASE-T
  • 802.3z 1000BASE-X
  • 802.3az Power Saving
802.1 协议
  • 802.1p: LAN Layer 2 QoS/CoS
  • 802.1q: VLAN Bridge Operation
端口管理
  • 端口开关
  • 端口协商速率
  • 端口聚合（静态）
  • 端口镜像
  • 速率限制
  • 巨型帧设置
  • 风暴控制
  • 流量监控
  • MAC地址管理
  • 节能以太网 (802.3az)
端口聚合组数量 4
单聚合组内端口（个） 8
L2层管理功能
  • IGMP 侦听
  • 环路预防
  • MTU VLAN
  • 基于端口的 VLAN
  • 802.1Q VLAN
  • DSCP QoS
  • 802.1p QoS
  • 基于端口的 QoS
可靠性
可靠性 接地方式 接地螺丝
安全性 IEC/EN 62368
EMC 电磁兼容性 EN55032 Class A
EN55035 Class A
EMI 电磁干扰控制标准 FCC 47 CFR Part 15B Class A
EMS 电磁抗扰性能 IEC/EN 61000-4-2, Level 4 ESD: Contact: 8kV; Air: 15kV
IEC/EN 61000-4-3, Level 4 RS: 80 MHz to 1 GHz: 30 V/m
IEC/EN 61000-4-4, Level 4 EFT: Power: 2kV; RJ45: 4kV
IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 6kV
IEC/EN 61000-4-6, Level 3 CS: 10V
IEC/EN 61000-4-8, Level 5 PFMF
IEC/EN 61000-4-9, Level 5 PMF
IEC/EN 61000-4-10, Level 5 DOMF
EMS 备注 本产品在 IEC/EN 标准中定义的每个抗干扰分支下超过其定义的最高级别标准。
耐震动 IEC 60068-2-6
耐冲击 IEC 60068-2-27
耐自由跌落 IEC 60068-2-32
运行环境 运行环境温度: -40 ℃ ~ 75 ℃
储存温度: -40 ℃ ~ 85 ℃
运行湿度: 5% ~ 95% 非凝结
储存湿度: 5% ~ 95% 非凝结
系统
系统 管理方式 Web 网页管理
固件升级 本地升级
配置备份 备份与恢复
诊断工具
  • 网线状态/长度诊断
  • Ping
尺寸与重量
尺寸与重量 尺寸 主体:
47.5×103×144 mm
安装所需空间:
47.5×147×165 mm
材质与安装
材质与安装 机身材质 铝合金
IP 等级 IP40
安装方式 导轨安装
包装清单
包装清单
  • IG1005ES1
  • 安装手册
订购信息
订购信息 零售包装尺寸 207×154×75mm
外箱尺寸 43.9×40.5×33.1 cm