警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1319 則留言
Dear customer,
Thank you for contacting Cudy support team.
We need the OpenWrt forum official support the router at first and release the OpenWrt firmware. Then, we can release a middle firmware for you, then you can use and upgrade to the other OpenWrt firmware. Do you get the OpenWrt firmware of M1300 now?
@Shawon
Dear customer,
Thank you for contacting Cudy support team.
We need the OpenWrt forum official support the router at first and release the OpenWrt firmware. Then, we can release a middle firmware for you, then you can use and upgrade to the other OpenWrt firmware. Do you get the OpenWrt firmware of M1300 now?
“Could you kindly pleeease add openwrt software for Cudy M1300 on the list.
It will be very helpful.
Thank you.”
@Kasey,
Dear customer,
Thank you for contacting Cudy support team.
We need the OpenWrt forum official support the router at first and release the OpenWrt firmware. Then, we can release a middle firmware for you, then you can use and upgrade to the other OpenWrt firmware. Do you get the OpenWrt firmware of WR3000E now?
“Is it possible to add an image to unlock the WR3000E? I see the normal WR3000 already has one, but it of course does not work. I’d like to begin work on porting OpenWRT to this device.”
Is it possible to add an image to unlock the WR3000E? I see the normal WR3000 already has one, but it of course does not work. I’d like to begin work on porting OpenWRT to this device.
Could you kindly pleeease add openwrt software for Cudy M1300 on the list.
It will be very helpful.
Thank you.
@Marek,
OK,I have forwarded you request to our R&D team. Please wait patiently for the intermediate firmware.
“It seems something has changed in the bootloader installed with the latest WR300 firmware (WR300-R54-2.2.8-20241015-162008-flash) – after downgrade to the older version (WR300-R54-1.16.15-20231130-131612-flash) I can see normal messages at 115200 again, no more garbage.
Could you tell me how to stop u-boot so I can load the OpenWrt image (built by me, not signed by you) – it boots the original firmware from flash without any delay, and no Linux shell access is possible.”