警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1319 則留言
Hi,
after successfully migrating my TR3000 to OpenWrt I am somewhat confused about
the usable flash size.
The page https://openwrt.org/toh/cudy/tr3000 shows the flash layout of the device.
Summing up all the partitions results in 71.4 MiB. So I miss the difference up to 128 MiB.
The OpenWrt boot log shows:
0.924234] Creating 6 MTD partitions on “spi0.0”:
… kern.notice kernel: [ 0.929038] 0×000000000000-0×000000100000 : “BL2”
… kern.notice kernel: [ 0.934696] 0×000000100000-0×000000180000 : “u-boot-env”
… kern.notice kernel: [ 0.940740] 0×000000180000-0×000000380000 : “Factory”
… kern.notice kernel: [ 0.947440] 0×000000380000-0×0000003c0000 : “bdinfo”
… kern.notice kernel: [ 0.953238] 0×0000003c0000-0×0000005c0000 : “FIP”
… kern.notice kernel: [ 0.959358] 0×0000005c0000-0×0000045c0000 : “ubi”
Calculating these partition sizes results in exactly the same size: 71.4 MiB.
May be my understanding of the flash memory is wrong. Hence would like
if someone could explain the missing MiBs. Many thanks in advance.
Do you plan to issue an OpenWRT port for the WR3600H router ? I would like to implement VLANs.
Second, any chance to enable HTTPS to access the router instead of HTTP?
Third, could you publish the API for the router, it would be great to integrate in HomeAssistant & Home Bridge
thanks a lot
@Sam,
Dear Customer，
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.
“Hi,
Do you plan to issue an OpenWRT port for the R700 router ? I would like to implement VLANs.
Second, any chance to enable HTTPS to access the router instead of HTTP?
Third, could you publish the API for the router, it would be great to intergrate in HomeAssistant/NodeRed.
thanks a lot
"
@Md. Hussain Mahi
Dear Customer，
Thank you for contacting Cudy support team.
Please check on the article, there are two download link. First you need to update the firmware to remove the Signature. Second, you must update the final OpenWrt firmware.
“Subject: Request for OpenWRT Firmware for Cudy WR3000 V1
Dear Cudy Support Team,
I hope you are doing well. I am using the Cudy WR3000 V1 router and would like to install OpenWRT on it. I am reaching out to request a firmware file that allows direct OpenWRT updates using the router’s firmware update settings.
Additionally, I would appreciate it if the firmware includes the following configurations:
Wi-Fi (WLAN) enabled by default
2.4GHz Wireless Name: OPENWRT
5GHz Wireless Name: OPENWRT 5GHz
LAN Login IP: 192.168.0.1
Please let me know if you can provide this firmware or any guidance on achieving these settings. Looking forward to your response.”
@Sabbir,
Dear Customer，
Thank you for contacting Cudy support team.
Sorry, we don’t offer this support about the OpenWrt firmware. Please try to find the instruction on the internet.
“Can you please share the complete guide on how to flash official OpenWRT and how to use Mesh in OpenWRT ?”