1.從 這裡。
2.從 官方網站並將其重新命名為"recovery.bin"。
3.關閉路由器電源。拔掉電源供應器或按電源按鈕。
4.使用乙太網路線將電腦連接到路由器的 LAN 連接埠。
5.手動將電腦的 IP 位址配置為"192.168.1.88"。 6.執行"tftp32.exe"。
7.在命令列中執行"netsh advfirewall set allprofiles state off"來停用Windows防火牆，否則tftp將被阻止。
8.按下"重設"按鈕/孔並按住。在路由器開機和 tftp 開始下載韌體之前，請勿放開"重設"按鈕/孔。 9.開啟路由器電源。 10。當指示燈全部快速閃爍時，或 tftp 開始下載韌體時，您可以放開"重設"按鈕/孔。
11.當燈慢閃時，升級完成。
12.請將您電腦的IP位址還原為動態IP。 13.完成。
223 則留言
He tenido que volver a las versión del Firmware original, ya que en Openwrt al configurar la Wifi 5G en ancho de banda 160 mhz, desparece y no se puede conectar. He hecho muchas pruebas y es cambiarlo a 80 mhz y si funciona. Este problema con el firm de Cudy no pasa. Se queda configurado en 160mhz y todo normal.
@Dear MD RAKIBUL ISLAM,
Yes, you can do it. This method also can recover the broken firmware issue.
“Hi Cudy, Can I follow all of these step to unbrick my Cudy WR1200 V2 which will be bricked due to sudden load shedding during firmware update 🙂? Please help”
Hi Cudy, Can I follow all of these step to unbrick my Cudy WR1200 V2 which will be bricked due to sudden load shedding during firmware update 🙂? Please help
@Dear Alan,
Please check if your use the correct firmware. You must use the firmware for TR3000 256MB, which the firmware version on Cudy official website is 2.3.9. Then you can follow the steps as the instruction.
“I am confident that it is the 256MB version because I purchased it from China, and the box, router, label, etc., all indicate “256MB.” However, when I opened the router, I discovered that the chip memory is ESMT F50L1G41LB only 128MB. You can check my post here: [https://www.right.com.cn/forum/thread-8441740-1-1.html] for a screenshot. I also sent this information to sales@cudy.com but haven’t received a reply.”
I am confident that it is the 256MB version because I purchased it from China, and the box, router, label, etc., all indicate “256MB.” However, when I opened the router, I discovered that the chip memory is ESMT F50L1G41LB only 128MB. You can check my post here: [https://www.right.com.cn/forum/thread-8441740-1-1.html] for a screenshot. I also sent this information to sales@cudy.com but haven’t received a reply.