1.從 這裡。
2.從 官方網站並將其重新命名為"recovery.bin"。
3.關閉路由器電源。拔掉電源供應器或按電源按鈕。
4.使用乙太網路線將電腦連接到路由器的 LAN 連接埠。
5.手動將電腦的 IP 位址配置為"192.168.1.88"。 6.執行"tftp32.exe"。
7.在命令列中執行"netsh advfirewall set allprofiles state off"來停用Windows防火牆，否則tftp將被阻止。
8.按下"重設"按鈕/孔並按住。在路由器開機和 tftp 開始下載韌體之前，請勿放開"重設"按鈕/孔。 9.開啟路由器電源。 10。當指示燈全部快速閃爍時，或 tftp 開始下載韌體時，您可以放開"重設"按鈕/孔。
11.當燈慢閃時，升級完成。
12.請將您電腦的IP位址還原為動態IP。 13.完成。
142 則留言
здравствуйте,на wr300 после возвращения с openwrt на официальную прошивку,поле создания/ввода пароля не активно,а под ним строка “Неверная информация о доске!”из-за чего нельзя войти в настройки устройства и настроить его.Как исправить?
@Dear Rafiur，
Sorry, the router is faulty. I suggest you to buy a new one.
“I am also having problem, showing invalid board info
In cudy m1800 v2"
I am also having problem, showing invalid board info
In cudy m1800 v2
@Dear Hans,
Sorry, we don’t offer this help as you said.
“Dear Cudy Support,
I’m working with the WR11000 (model R65) and would like to request a signed firmware based on version 2.2.16 DE, with SSH access enabled by default. This is for development and testing purposes only, and I fully accept any associated risks.
Could you provide such a firmware or let me know if it’s possible?
Thank you for your support.”
Dear Cudy Support,
I’m working with the WR11000 (model R65) and would like to request a signed firmware based on version 2.2.16 DE, with SSH access enabled by default. This is for development and testing purposes only, and I fully accept any associated risks.
Could you provide such a firmware or let me know if it’s possible?
Thank you for your support.