VPN 用戶端是用於在使用者和 VPN 伺服器之間建立安全連線的終端設備或軟體。
什麼是 VPN？ p>
VPN（虛擬私人網路）透過隧道技術協助您遠端、安全、私密地存取網際網路資源。 VPN 會對您的個人資訊進行加密，並在您使用網路時向公眾隱藏您的 IP 位址。對於 VPN 用戶來說，電腦看起來像是直接相互連接的。
一般網路拓樸：
這裡以WR2100為例 第1 步：開啟網頁瀏覽器並前往http: // /cudy.net 或http ://192.168.10.1。 詳情請參考如何登入Cudy 的網頁介面路由器？ 第 2 步： 點選 常規設定->VPN並啟用VPN. 預設規則： 允許所有設備或禁止所有設備使用VPN。
要指定設備，請點選系統狀態- > 設備->VPN 啟用或停用它。
站點到站點：< /strong >允許兩個站點中的設備相互通訊。
VPN 政策： 停用： 無需其他設定。 VPN 終止開關：當VPN 連線遺失時關閉網路連線。
域：指定哪些域通過 VPN，哪些不 遠端子網路：指定哪些子網路透過 VPN哪些不 第 3 步： 在協定清單中，選擇您需要的協定並輸入VPN 提供者提供的VPN 資訊。
• PPTP VPN 輸入 VPN 伺服器位址（例如 113.92.73.163）以及 VPN 使用者名稱和密碼由您的VPN提供者提供。
• L2TP VPN 輸入 VPN 伺服器位址（例如 113.92.73.163）、VPN 使用者名稱和密碼以及您提供的預共用金鑰VPN 供應商。
如果您的VPN 提供者也為您提供了與帳戶綁定的隧道IP，您可以啟用使用自訂隧道 IP 選項。
• OpenVPN < /跨度> 點選瀏覽器匯入由您的VPN 供應商。
• WireGuard VPN 點選瀏覽器匯入由您的VPN 供應商。
介面和對等點將自動從VPN 提供者的CONF 檔案同步。
• ZeroTier 從站
輸入 ZeroTier 網路 ID 和 網關由ZeroTier Master 提供。網關可以在 VPN 狀態部分找到。
141 則留言
Hopefully you’ve received the requested screenshots etc. by mail a week ago regarding “WR3000E FW 2.4.7 doesn’t auto-reconnect dropped WireGuard and may leak IP despite VPN kill switch (in WISP at least)”. If you need any further information, please let me know.
@Dear Martin,
You need to set routing rules on the VPN server. The target is the LAN subnet of LT12, The next hop is the VPN tunnel IP address. You can have a try.
Is the VPN Server set on a Cudy router? If yes, you can set the remote subnet when creating wireguard config.
“I have a configuration where I’m running a WireGuard server, and I connect to it as a client using an LT12 router.
The tunnel is established, the handshake is exchanged, and “data is being transferred.”
I even managed to route all LAN traffic through the WireGuard VPS server’s WAN.
I can successfully ping the WireGuard server (data is going properly do Lt12, i did tcp dump)
However, for some reason, I’m unable to reach the WireGuard client on the LT12 from the VPS server.
I’ve tried many things — I have the exact same configuration on another client, and it works.
In the VPN settings, I also have the Site-to-Site option enabled. Should I change something in the routing?
What I want is a setup where I can access both the WireGuard server and Client B (on a laptop that’s also a WireGuard client)."
I have a configuration where I’m running a WireGuard server, and I connect to it as a client using an LT12 router.
The tunnel is established, the handshake is exchanged, and “data is being transferred.”
I even managed to route all LAN traffic through the WireGuard VPS server’s WAN.
I can successfully ping the WireGuard server (data is going properly do Lt12, i did tcp dump)
However, for some reason, I’m unable to reach the WireGuard client on the LT12 from the VPS server.
I’ve tried many things — I have the exact same configuration on another client, and it works.
In the VPN settings, I also have the Site-to-Site option enabled. Should I change something in the routing?
What I want is a setup where I can access both the WireGuard server and Client B (on a laptop that’s also a WireGuard client).
Dear TEN, Yes, there is a @. samcudy.com.
“Is an @ supposed to go between your name and your company’s?
Will be happy to provide you with all relevant (redacted) screenshots and logs.
Cannot currently record or live-stream video though, as I am not where the router is, and it is on low bandwidth even when (intermittently) online.”
Is an @ supposed to go between your name and your company’s?
Will be happy to provide you with all relevant (redacted) screenshots and logs.
Cannot currently record or live-stream video though, as I am not where the router is, and it is on low bandwidth even when (intermittently) online.