VPN 用戶端是用於在使用者和 VPN 伺服器之間建立安全連線的終端設備或軟體。
什麼是 VPN？ p>
VPN（虛擬私人網路）透過隧道技術協助您遠端、安全、私密地存取網際網路資源。 VPN 會對您的個人資訊進行加密，並在您使用網路時向公眾隱藏您的 IP 位址。對於 VPN 用戶來說，電腦看起來像是直接相互連接的。
一般網路拓樸：
這裡以WR2100為例 第1 步：開啟網頁瀏覽器並前往http: // /cudy.net 或http ://192.168.10.1。 詳情請參考如何登入Cudy 的網頁介面路由器？ 第 2 步： 點選 常規設定->VPN並啟用VPN. 預設規則： 允許所有設備或禁止所有設備使用VPN。
要指定設備，請點選系統狀態- > 設備->VPN 啟用或停用它。
站點到站點：< /strong >允許兩個站點中的設備相互通訊。
VPN 政策： 停用： 無需其他設定。 VPN 終止開關：當VPN 連線遺失時關閉網路連線。
域：指定哪些域通過 VPN，哪些不 遠端子網路：指定哪些子網路透過 VPN哪些不 第 3 步： 在協定清單中，選擇您需要的協定並輸入VPN 提供者提供的VPN 資訊。
• PPTP VPN 輸入 VPN 伺服器位址（例如 113.92.73.163）以及 VPN 使用者名稱和密碼由您的VPN提供者提供。
• L2TP VPN 輸入 VPN 伺服器位址（例如 113.92.73.163）、VPN 使用者名稱和密碼以及您提供的預共用金鑰VPN 供應商。
如果您的VPN 提供者也為您提供了與帳戶綁定的隧道IP，您可以啟用使用自訂隧道 IP 選項。
• OpenVPN < /跨度> 點選瀏覽器匯入由您的VPN 供應商。
• WireGuard VPN 點選瀏覽器匯入由您的VPN 供應商。
介面和對等點將自動從VPN 提供者的CONF 檔案同步。
• ZeroTier 從站
輸入 ZeroTier 網路 ID 和 網關由ZeroTier Master 提供。網關可以在 VPN 狀態部分找到。
141 則留言
Good morning, I created LAN1 with an OpenVPN server on an OpenWrt router and LAN2 with a Cudy LT500 OpenVPN client router. The VPN (TUN) closes but I can’t ping LAN2 from LAN1. From within Cudy, I can ping devices on LAN1 and those addressed to the VPN network via the VPN interface, but from the Cudy LAN interface, however, I can’t. From LAN1, I can ping the server-side VPN interface but not the Cudy-side VPN interface or the Cudy-side LAN subnet. Basically, the VPN isn’t redirected to the Cudy LAN. I’ve tried every possible Cudy setting to no avail. It seems there’s a missing network connecting the VPN to the LAN. Do you have any suggestions? Is there any way to access it via SSH to manually add the missing routes? If so, how? Thanks.
@Dear TEN,
OK, I will reply you via email.
“Current firmware (at least in WISP) frequently drops WireGuard then leaks IP as discussed (and also reported by others) on what today is https://www.cudy.com/de-de/blogs/faq/wie-stelle-ich-den-vpn-client-ein-um-auf-einen-remote-vpn-server-zugreifen?page=4#Comments-589223624948 – as requested I’ve sent all details to sam at cudy dot com some 6 weeks ago and been asked to wait, but never received confirmation, follow-up or word of a fix”
Current firmware (at least in WISP) frequently drops WireGuard then leaks IP as discussed (and also reported by others) on what today is https://www.cudy.com/de-de/blogs/faq/wie-stelle-ich-den-vpn-client-ein-um-auf-einen-remote-vpn-server-zugreifen?page=4#Comments-589223624948 – as requested I’ve sent all details to sam at cudy dot com some 6 weeks ago and been asked to wait, but never received confirmation, follow-up or word of a fix.
@Dear TEN,
Sorry, please tell me details about the problem you encountered.
“Any developments or requests for information as to “WR3000E FW 2.4.7 doesn’t auto-reconnect dropped WireGuard and may leak IP despite VPN kill switch (in WISP at least)”, currently on Comments pages 3 & 4 below?”
Any developments or requests for information as to “WR3000E FW 2.4.7 doesn’t auto-reconnect dropped WireGuard and may leak IP despite VPN kill switch (in WISP at least)”, currently on Comments pages 3 & 4 below?