中國深圳— Cudy 發布了 WR1300 和 WR3000 的新固件，增加了對 Captive Portal 功能的支援。此增強功能可讓使用者自訂登入體驗、強化品牌，甚至設定付費 Wi-Fi。
WR1300 和 WR3000 使用者可以從支援頁面下載韌體，並按照設定頁面上的說明昇級其裝置。如果您正在尋找登入設定頁面的方法，請參閱 '如何登入Cudy Router的Web介面？'
AP 產品（包括 AP1300、AP3000、AP1200 Outdoor、AP1300 Outdoor、AP3000 Outdoor 和 RE1200 Outdoor）的 Cudy 使用者現在可以透過將其裝置與 WR1300 配對來啟動強制入口網站功能或配對開啟強制網路入口網站功能的WR3000。 RE 或 AP 模式下的其他 Cudy 裝置在連接到路由器時也會啟用強制入口網站。
Cudy 路由器嵌入了五個強制門戶提供者，而且設定過程非常簡單。在下面列出的提供者建立帳戶後，使用者可以在 Cudy 路由器的設定頁面上輸入設定值以啟用強制入口網站。您可以在 WR1300模擬器。
免責聲明：在實施強制入口網站時，請務必注意，使用第三方強制入口網站解決方案可能會存在不同程度的相容性和安全風險。第三方解決方案由使用者自行決定，可能需要額外的配置和故障排除。
Cudy AP 產品預計也將支援獨立模式的 Captive Portal，因此無需使用另一個路由器作為網關來啟用它。清單包括 AP1300、AP1300 Outdoor、AP3000 和 AP3000 Outdoor。 Beta 韌體測試目前正在進行中。
24 則留言
Hi
I am using the WR3000 Router with captive portal enabled. When users connect to the AX3000 AP node controlled by the WR3000 router, it does not redirtect them to the captive portal.
My setup: Internet → WR3000 Router → Cudy POE Switch → AX3000 AP
The AP’s are wired to the POE switch, and the switch is wired to the WR3000 Router, that is setup with the captive portal.
Please advise how I get the clients to be routed to the captive portal through the AP’s.
@Dear BEN,
The Cudy AP also support remote web management function. You can go to “Advanced Settings” —“Administration” function page. You can enable it and try to login the web page of the AP remotely.
But you need to know. This function requires the public IPv4 address.
In addition, if your AP is working on Wireless router or WISP mode. You can use the zerotier VPN function. Please refer to this instruction attached to set up the zerotier VPN.
https://www.cudy.com/blogs/faq/how-to-remote-connect-cudy-router-via-zerotier
“how can I set my cudy ax3000 outdoor so that I can remotely control without using the cudy app.?”
how can I set my cudy ax3000 outdoor so that I can remotely control without using the cudy app.?
@Dear Justin,
You need to install a portal server and radius server to use the manual option. It is too difficult. I suggest you use the current portal service provider, such as the HOTSTOPSYSTEM. It will be easier.
How can I set up the captive portal to just forward to my website? Do I still need pay for a third party? If the answer is manual can you please share the info I would put in to make it work?