WISP 模式：
在 WISP 模式下，路由器允許多個使用者共享 WISP 的網路連線。 LAN 埠設備透過無線連接埠與 WISP 共用相同的 IP。連接到WISP時，無線連接埠充當WAN連接埠。
常見網路拓樸：
第1 步： 開啟網路瀏覽器並前往 http://cudy.net 或 http://192.168.10.1.
詳情請參考 如何登入Cudy Router的Web介面？
第2 步： 將彈出快速設定窗口，選擇"WISP"，然後前往"下一步"。
第3 步： 選擇您的"時區"。
第4 步： 選擇您要擴充的主機網路。點選"連接"。
或點選 常規設定->WISP->啟用 然後選擇您要擴充的主機網路。
第5 步： 輸入主機網路的無線密碼。
注意： 請確保您輸入的無線密碼正確，否則設定無法成功。
第6 步： 自訂無線網路名稱和密碼或保留預設值。
第7 步： 點選"儲存並套用"完成設定。
第8 步： 等待幾秒鐘系統重新啟動，當再次彈出登入頁面時，您就可以享受網路了。
49 則留言
WR3600H or add OpenWRT or finish the firmware with a working WISP? I got my hands on beta 2.3.11 which has WISP but there are a lot of bugs that are impossible to live with. Give me a real time frame for the release of a working firmware with WISP or WRT so that I can either return your router or wait for a working firmware.
@Dear TH,
TR3000 doesn’t support connecting to the PEAP Wi-Fi network currently. We will feed back this to Cudy R&D team to evaluate if we can support in future.
“I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?”
I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?
@Dear Pavel,
I think it is related to the 5G WiFi channel. Please set the 5GHz channel of your existing WiFi to one of the 36-48, then check if the problem fixed?
“I have a problem setting up wisp mesh network – Cudy doesn’t see my 5G wifi network, only 2g. therefore the speed is low if I do mesh with WIPS 2g, I can’t find my 5g network, my laptop, phone etc see this network. Cudy – no. Pls help”
@Dear Jon,
1. We suggest you to use the WISP mode. And bind the MAC address of the TR3000.(You need to check the WiFi mac address first) You can connect it to your existing WiFi network first, then check the WiFi MAC address of the WISP interface on the WiFi client list of the exist WiFi’s WEB page.
2. I can’t for sure about it. If the Portal Wi-Fi has no limit. It will work.
3. For now, TR3000 doesn’t support MAC clone function. We will try to develop this function in future.
“For sharing hotel or cruise ship Captive Portal Wifi when they only allow 1 device to connect but you want the TR3000 to allow multiple personal devices to connect is WISP mode the recommended mode? Does this work with Captive Portal on the hotel/cruise ships side? If so how do you configure MAC address cloning so the router uses my iPhone’s MAC address?”