IP 预留，用于为 MAC 地址分配静态 IPv4 地址。
步骤 1： 打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
步骤2 ：单击安全部分中的高级设置-> IP/MAC绑定。
步骤 3 ：单击“添加”将一个条目添加到列表中。从 MAC 地址列表中选择设备，然后输入要分配的 IP 地址。为此条目输入注释（可选）。
步骤 4 ：保存并应用设置。
断开设备并重新连接。然后您可以检查设备的 IP 地址是否与您设置的 IP 地址一致。
注意：这些条目的 IP 地址和 MAC 地址也进行 ARP 绑定。
14 条评论
@Dear Ron Rossi,
For now Cudy routers don’t support this. We will provide your feedback to the product department for evaluation.
“I am setting up the Cudy 4G LTE AC1200 router and have a decent list of reserved IP addresses from another router. Most of the devices are not connected at the moment. It is convenient to set this up ahead of time. Can I upload a file with the macs, names, IPs rather than hand enter them all?? Thanks.”
I am setting up the Cudy 4G LTE AC1200 router and have a decent list of reserved IP addresses from another router. Most of the devices are not connected at the moment. It is convenient to set this up ahead of time. Can I upload a file with the macs, names, IPs rather than hand enter them all?? Thanks.
@Dear Petros,
Our technical support has contacted you via email. Please check.
“Hello and happy new year! I have recently purchased a WR11000 router and 3 BE11000s to be used in a mesh configuration. The BE1s000s use a wired backhaul and all devices run the latest firmware. Devices connected via wire work fine. WiFi however is very problematic and slow. I am not referring to coverage as I checked with my phone next to the BE11000. I only got at most 45Mbps (the wired connection is 1Gbps and with wired devices I get that in full). Some devices cannot even connect via wifi. Anything you can suggest?
Thank you”
Hello and happy new year! I have recently purchased a WR11000 router and 3 BE11000s to be used in a mesh configuration. The BE1s000s use a wired backhaul and all devices run the latest firmware. Devices connected via wire work fine. WiFi however is very problematic and slow. I am not referring to coverage as I checked with my phone next to the BE11000. I only got at most 45Mbps (the wired connection is 1Gbps and with wired devices I get that in full). Some devices cannot even connect via wifi. Anything you can suggest?
Thank you
@Dear Moses,
I don’t understand what do want to ask, please tell me more details about your question.
“How devices you bing using IP/MAC Adrress binding. Limitation of devices on network”