IP 预留，用于为 MAC 地址分配静态 IPv4 地址。
步骤 1： 打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
步骤2 ：单击安全部分中的高级设置-> IP/MAC绑定。
步骤 3 ：单击“添加”将一个条目添加到列表中。从 MAC 地址列表中选择设备，然后输入要分配的 IP 地址。为此条目输入注释（可选）。
步骤 4 ：保存并应用设置。
断开设备并重新连接。然后您可以检查设备的 IP 地址是否与您设置的 IP 地址一致。
注意：这些条目的 IP 地址和 MAC 地址也进行 ARP 绑定。
14 条评论
@Radek,
Dear Customer，
Thank you for contacting Cudy support team. Our technical support has contacted you via email. Please check.
Hello,
I recently purchased WX3000S router and I love it.
One question though: I want to use it as a wireless access point AND switch/router at the same time, but without the DHCP server – the adresses should be assigned by my main router from my ISP. Also, I want to run a VPN connection. I set it all up just fine, but when I turn off the DHCP server, my wired devices don’t get IP adress assigned? Is this achievable?
how can i
@Noam,
Dear Customer,
Thank you for contacting Cudy support team.
Sorry, the router doesn’t support this. But if you use Wireguard Server on the router, you can set the IP address of the client.
“How do I bind an IP address for a client that connects to the Cudy’s OpenVPN server?”