IP 预留，用于为 MAC 地址分配静态 IPv4 地址。
步骤 1： 打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
步骤2 ：单击安全部分中的高级设置-> IP/MAC绑定。
步骤 3 ：单击“添加”将一个条目添加到列表中。从 MAC 地址列表中选择设备，然后输入要分配的 IP 地址。为此条目输入注释（可选）。
步骤 4 ：保存并应用设置。
断开设备并重新连接。然后您可以检查设备的 IP 地址是否与您设置的 IP 地址一致。
注意：这些条目的 IP 地址和 MAC 地址也进行 ARP 绑定。
12 条评论
How do you allocate a specific IP address to a device using its MAC address?
Regard PJJ Informatika
@Oren,
There is a Delete button on the side of the entry. You can click it to delete it.
“How do you delete a Reserved IP entry when the equipment is removed from the network?”
How do you delete a Reserved IP entry when the equipment is removed from the network?
@Radek,
Dear Customer，
Thank you for contacting Cudy support team. Our technical support has contacted you via email. Please check.
Hello,
I recently purchased WX3000S router and I love it.
One question though: I want to use it as a wireless access point AND switch/router at the same time, but without the DHCP server – the adresses should be assigned by my main router from my ISP. Also, I want to run a VPN connection. I set it all up just fine, but when I turn off the DHCP server, my wired devices don’t get IP adress assigned? Is this achievable?