ฉันจะตั้งค่าไคลเอนต์ VPN ให้เข้าถึงเซิร์ฟเวอร์ VPN ระยะไกลได้อย่างไร

@Dear Mike,
Is there any difference betweem AmneziaWG VPN and standard Wireguard VPN? Can you send us some introduction about AmneziaWG VPN?

“I do support question about AmneziaWG VPN. Is there a possibility that you’ll add this protocol in future versions?”

I do support question about AmneziaWG VPN. Is there a possibility that you’ll add this protocol in future versions?

@Dear Sewil,
Please try to update the router to the latest firmware version first. Then check if the problem fixed?

“Hi
I tried to run OpenVPN Client on CUDY WR300H.
Unfortunately after uploading configuration file and login/pwd I’m receiving message
“daemon.err openvpn(client)18653: Options error: Unrecognized option or missing or extra parameter(s) in /etc/openvpn/client/client.ovpn:10: gro (2.5.2)”
How I can fix it ?”

Hi
I tried to run OpenVPN Client on CUDY WR300H.
Unfortunately after uploading configuration file and login/pwd I’m receiving message
“daemon.err openvpn(client)18653: Options error: Unrecognized option or missing or extra parameter(s) in /etc/openvpn/client/client.ovpn:10: gro (2.5.2)”
How I can fix it ?

Dear Adriano, 1. Please use a phone or computer connect to the router, then try to connect to the VPN server on the phone or computer. Check if the device can connect? 2. Please check if the firmware of the router is the latest version, if not, please update and check. 3. If the phone or computer can connect to the VPN server when connected to the router and the firmware is the latest. Please login to the web page of the router, download the Diagnosis bin file in "Diagnostic Tools"->"Diagnosis"->"GO"->"Download", and send the file to me. My email address is samcudy.com.

“Hello,

We bought a LT500D to test if we could use it to connect it to our own VPN server (openvpn) so all devices connected to it would be accessible from our network…
Managed to configure everything, import a openvpn profile specifically created for it… but it doesnt even try to connect to our server and stays all the time saying “not connected”..

Can you help?

Thank you,
Regards,
AP"